[pgpool-hackers: 3670] Re: 答复: error of LDAP authentication from [pgpool-hackers:3538]
Ahsan Hadi
ahsan.hadi at gmail.com
Tue Jun 23 16:15:47 JST 2020
On Mon, Jun 22, 2020 at 10:24 PM Ahsan Hadi <ahsan.hadi at gmail.com> wrote:
> Hi Hoshiai-san,
>
> I am getting a warning with configure..
>
> configure: WARNING: unrecognized options: --with-ldap
>
> with this configure command..
>
> ./configure --prefix=/usr/local/postgres/pgpool_41
> --with-pgsql=/usr/local/postgres/pgsql/ --with-ldap
>
> I have applied the pgpoo_ldap_auth_v3.patch on pgpool II 4.1 stable
> branch, the patch applies cleanly. I have been having some issues with
> running master branch so trying with 4.1 stable branch..
>
Thanks, I have fixed the configure issue after doing autoheard, aclocal,
automake and autoconf...
>
> - Ahsan
>
> On Fri, Jun 12, 2020 at 1:31 PM Takuma Hoshiai <hoshiai at sraoss.co.jp>
> wrote:
>
>> On Thu, 11 Jun 2020 15:53:21 +0900
>> Takuma Hoshiai <hoshiai at sraoss.co.jp> wrote:
>>
>> > On Wed, 10 Jun 2020 08:37:07 +0000
>> > 周建身 <zhoujianshen at highgo.com> wrote:
>> >
>> > > Hello Takuma Hoshiai，
>> > > I did the patch of pgpool_ldap_auth_v2.patch you send in this
>> email.then I tried to do ldap authentication as I did with postgresql. But
>> I got a segmentation fault.
>> > > I tried to find out why this happened. I find that postgresql has
>> Macro definition of HAVE_LDAP_INITIALIZE,but pgpool does not have.I think
>> there may be still two problem remains.
>> > > 1、do config
>> > > ./configure --prefix=/opt/pgpool --with-pgsql=/opt/PG12 --with-ldap
>> > > --with-ldap parameter do not enable precompilation of #ifdef
>> HAVE_LDAP_INITIALIZE
>> > >
>> > > 2、there is a spelling error in program.
>> > > ldap_dn2domain(frontdend->pool_hba->ldapbasedn, &domain) should be
>> > > ldap_dn2domain(frontend->pool_hba->ldapbasedn, &domain)
>> >
>> > Thank you for testing this patch.
>> > I will add its precomplication in configure.ac, and fix this typo.
>>
>> I update ldap's patch. On my environment, I tested that this patch work
>> correctly. Could you test to use this patch on your environment too?
>>
>> > > after defining HAVE_LDAP_INITIALIZE manually in program and correct
>> spelling error,then I can connect to pgpool through ldap authentication.
>> >
>> > That's great!
>> >
>> > > can you review this problem?
>> >
>> > Sure.
>> > I will check it.
>> >
>> >
>> > Best Regards,
>> > Takuma Hoshiai
>> >
>> > > Thanks
>> > > Best regards
>> > > Zhoujianshen
>> > > zhoujianshen at highgo.com
>> > > ________________________________________
>> > > 发件人: Takuma Hoshiai <hoshiai at sraoss.co.jp>
>> > > 发送时间: 2020年4月21日 16:31
>> > > 收件人: 周建身
>> > > 抄送: pgpool-hackers; Muhammad; 吕昊凌
>> > > 主题: Re: error of LDAP authentication from [pgpool-hackers:3538]
>> > >
>> > > Hello
>> > >
>> > > Thank you for letting me know.
>> > > After checking, I find out this problem. It happend when --with-ldap
>> and
>> > > --with-pam options were not used together.
>> > >
>> > > I have attached fixed patch for this problem.
>> > > Please try again with this patch.
>> > >
>> > > Best Regards,
>> > > Takuma Hoshiai
>> > >
>> > > On Tue, 21 Apr 2020 02:17:39 +0000
>> > > 周建身 <zhoujianshen at highgo.com> wrote:
>> > >
>> > > > Hello
>> > > >
>> > > >
>> > > > Under the directory of pgpool,I did the patch of LDAP
>> authentication from [pgpool-hackers:3538].
>> > > >
>> > > > The patched command which I used is,patch -p1 <
>> pgpool_ldap_auth.patch.I got pgpool_ldap_auth.patch from
>> [pgpool-hackers:3538].
>> > > >
>> > > >
>> > > >
>> > > > The patched results are as follows
>> > > >
>> > > >
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file configure.ac
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file doc.ja/src/sgml/client-auth.sgml
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file doc/src/sgml/client-auth.sgml
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file src/auth/pool_auth.c
>> > > >
>> > > > (Stripping trailing ?CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file src/auth/pool_hba.c
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file src/include/auth/pool_hba.h
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file src/include/config.h.in
>> > > >
>> > > > (Stripping trailing CRs from patch; use --binary to disable.)
>> > > >
>> > > > patching file src/pgpool.spec
>> > > >
>> > > > patch unexpectedly ends in middle of line
>> > > >
>> > > > Hunk #1 succeeded at 103 with fuzz 1.
>> > > >
>> > > >
>> > > >
>> > > > I follow the guidelines to do next operation.
>> > > >
>> > > >
>> > > >
>> > > > $ autoheader
>> > > >
>> > > > $ aclocal
>> > > >
>> > > > $ automake -a -c
>> > > >
>> > > > $ autoconf
>> > > >
>> > > >
>> > > >
>> > > > Then,I did the configure.
>> > > >
>> > > >
>> > > >
>> > > > ./configure --prefix=/opt/pgpool_3 --with-pgsql=/opt/PG12
>> > > >
>> > > >
>> > > >
>> > > > Then I did the make operation which result in errors.
>> > > >
>> > > >
>> > > >
>> > > > auth/pool_hba.c:758:33: error: 'uaLDAP' undeclared (first use in
>> this function); did you mean 'uaMD5'?
>> > > >
>> > > > if (parsedline->auth_method == uaLDAP)
>> > > >
>> > > > ^~~~~~
>> > > >
>> > > > uaMD5
>> > > >
>> > > > auth/pool_hba.c:758:33: note: each undeclared identifier is
>> reported only once for each function it appears in
>> > > >
>> > > > auth/pool_hba.c: In function 'parse_hba_auth_opt':
>> > > >
>> > > > auth/pool_hba.c:895:23: error: 'uaLDAP' undeclared (first use in
>> this function); did you mean 'uaMD5'?
>> > > >
>> > > > REQUIRE_AUTH_OPTION(uaLDAP, "ldapurl", "ldap");
>> > > >
>> > > > ^
>> > > >
>> > > > auth/pool_hba.c:320:30: note: in definition of macro
>> 'REQUIRE_AUTH_OPTION'
>> > > >
>> > > > if (hbaline->auth_method != methodval) \
>> > > >
>> > > > ^~~~~~~~~
>> > > >
>> > > > Makefile:800: recipe for target 'auth/pool_hba.o' failed
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > I also did another configure.
>> > > >
>> > > > ./configure --prefix=/opt/pgpool_3 --with-pgsql=/opt/PG12
>> --with-ldap
>> > > >
>> > > >
>> > > >
>> > > > Then I did the make operation which result in other errors.
>> > > >
>> > > >
>> > > >
>> > > > auth/pool_hba.o: In function `CheckLDAPAuth':
>> > > >
>> > > > /auth/pool_hba.c:2623: undefined reference to `recv_password_packet'
>> > > >
>> > > > collect2: error: ld returned 1 exit status
>> > > >
>> > > > Makefile:777: recipe for target 'pgpool' failed
>> > > >
>> > > > make[2]: *** [pgpool] Error 1
>> > > >
>> > > > make[2]: Leaving directory '/home/zhoujianshen/pgpool-II-4.1.1/src'
>> > > >
>> > > > Makefile:866: recipe for target 'all-recursive' failed
>> > > >
>> > > > make[1]: *** [all-recursive] Error 1
>> > > >
>> > > > make[1]: Leaving directory '/home/zhoujianshen/pgpool-II-4.1.1/src'
>> > > >
>> > > > Makefile:410: recipe for target 'all-recursive' failed
>> > > >
>> > > > make: *** [all-recursive] Error 1
>> > > >
>> > > >
>> > > >
>> > > > Could you please help me checkout what result these errors,thanks.
>> > > >
>> > > >
>> > > >
>> > > > Thanks
>> > > > Best regards
>> > > > Jianshen Zhou
>> > > >
>> > >
>> > >
>> > > --
>> > > Takuma Hoshiai <hoshiai at sraoss.co.jp>
>> >
>> >
>> > --
>> > Takuma Hoshiai <hoshiai at sraoss.co.jp>
>> >
>> > _______________________________________________
>> > pgpool-hackers mailing list
>> > pgpool-hackers at pgpool.net
>> > http://www.pgpool.net/mailman/listinfo/pgpool-hackers
>>
>>
>> --
>> Takuma Hoshiai <hoshiai at sraoss.co.jp>
>> _______________________________________________
>> pgpool-hackers mailing list
>> pgpool-hackers at pgpool.net
>> http://www.pgpool.net/mailman/listinfo/pgpool-hackers
>>
>
>
> --
> Highgo Software (Canada/China/Pakistan)
> URL : http://www.highgo.ca
> ADDR: 10318 WHALLEY BLVD, Surrey, BC
> EMAIL: mailto: ahsan.hadi at highgo.ca
>
--
Highgo Software (Canada/China/Pakistan)
URL : http://www.highgo.ca
ADDR: 10318 WHALLEY BLVD, Surrey, BC
EMAIL: mailto: ahsan.hadi at highgo.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.sraoss.jp/pipermail/pgpool-hackers/attachments/20200623/3d7f9401/attachment.html>
More information about the pgpool-hackers
mailing list