[pgpool-general: 271] pgpool restart after losing node
Gales Romain
Romain.Gales at act.etat.lu
Fri Mar 9 00:15:05 JST 2012
Hi,
I am quiet new to pgpool. I am trying an setup with simple streaming. I
followed this howto
http://www.pgpool.net/pgpool-web/contrib_docs/simple_sr_setting2_3.1/index.h
tml.
Now when I lose one node all my clients were disconnected.
In the pgpool log file I find the following:
2012-03-08 15:52:16 LOG: pid 10884: find_primary_node_repeatedly: waiting
for finding a primary node
2012-03-08 15:52:16 LOG: pid 10884: find_primary_node: primary node id is
0
2012-03-08 15:52:16 LOG: pid 10884: failover: set new primary node: 0
2012-03-08 15:52:16 LOG: pid 10884: failover: set new master node: 0
2012-03-08 15:52:16 LOG: pid 10884: failback done. reconnect host
test3(5432)
2012-03-08 15:52:16 LOG: pid 10966: worker process received restart
request
2012-03-08 15:52:16 LOG: pid 30470: recovery done
2012-03-08 15:52:17 LOG: pid 10884: worker child 10966 exits with status
256
2012-03-08 15:52:17 LOG: pid 10884: fork a new worker child pid 30487
2012-03-08 15:52:17 LOG: pid 30470: pcp child process received restart
request
2012-03-08 15:52:17 LOG: pid 30438: do_child: failback event found.
restart myself.
...
2012-03-08 15:52:17 LOG: pid 10884: PCP child 30470 exits with status 256
2012-03-08 15:52:17 LOG: pid 10884: fork a new PCP child pid 30519
2012-03-08 15:52:17 LOG: pid 30466: statement: COMMIT
Is this restart normal?
My config:
# ----------------------------
# pgPool-II configuration file
# ----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# Whitespace may be used. Comments are introduced with "#" anywhere on a
line.
# The complete list of parameter names and allowed values can be found in
the
# pgPool-II documentation.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal. If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pgpool reload". Some
# parameters, which are marked below, require a server shutdown and restart
to
# take effect.
#
#---------------------------------------------------------------------------
---
# CONNECTIONS
#---------------------------------------------------------------------------
---
# - pgpool Connection Settings -
listen_addresses = '*'
# Host name or IP address to listen on:
# '*' for all, '' for no TCP/IP
connections
# (change requires restart)
port = 5432
# Port number
# (change requires restart)
socket_dir = '/tmp'
# Unix domain socket path
# The Debian package defaults to
# /var/run/postgresql
# (change requires restart)
# - pgpool Communication Manager Connection Settings -
pcp_port = 9898
# Port number for pcp
# (change requires restart)
pcp_socket_dir = '/tmp'
# Unix domain socket path for pcp
# The Debian package defaults to
# /var/run/postgresql
# (change requires restart)
# - Backend Connection Settings -
backend_hostname0 = 'test2'
# Host name or IP address to connect to
for backend 0
backend_port0 = 5432
# Port number for backend 0
backend_weight0 = 1
# Weight for backend 0 (only in load
balancing mode)
backend_data_directory0 = '/opt/PostgreSQL/9.1/data/'
# Data directory for backend 0
backend_flag0 = 'ALLOW_TO_FAILOVER'
# Controls various backend behavior
# ALLOW_TO_FAILOVER or
DISALLOW_TO_FAILOVER
backend_hostname1 = 'test3'
backend_port1 = 5432
backend_weight1 = 1
backend_data_directory1 = '/opt/PostgreSQL/9.1/data/'
backend_flag1 = 'ALLOW_TO_FAILOVER'
# - Authentication -
enable_pool_hba = off
# Use pool_hba.conf for client
authentication
authentication_timeout = 60
# Delay in seconds to complete client
authentication
# 0 means no timeout.
# - SSL Connections -
ssl = off
# Enable SSL support
# (change requires restart)
#ssl_key = './server.key'
# Path to the SSL private key file
# (change requires restart)
#ssl_cert = './server.cert'
# Path to the SSL public certificate file
# (change requires restart)
#ssl_ca_cert = ''
# Path to a single PEM format file
# containing CA root certificate(s)
# (change requires restart)
#ssl_ca_cert_dir = ''
# Directory containing CA root
certificate(s)
# (change requires restart)
#---------------------------------------------------------------------------
---
# POOLS
#---------------------------------------------------------------------------
---
# - Pool size -
num_init_children = 32
# Number of pools
# (change requires restart)
max_pool = 4
# Number of connections per pool
# (change requires restart)
# - Life time -
child_life_time = 300
# Pool exits after being idle for this
many seconds
child_max_connections = 0
# Pool exits after receiving that many
connections
# 0 means no exit
connection_life_time = 0
# Connection to backend closes after
being idle for this many seconds
# 0 means no close
client_idle_limit = 0
# Client is disconnected after being idle
for that many seconds
# (even inside an explicit transactions!)
# 0 means no disconnection
#---------------------------------------------------------------------------
---
# LOGS
#---------------------------------------------------------------------------
---
# - Where to log -
log_destination = 'stderr'
# Where to log
# Valid values are combinations of
stderr,
# and syslog. Default to stderr.
# - What to log -
print_timestamp = on
# Print timestamp on each line
# (change requires restart)
log_connections = on
# Log connections
log_hostname = on
# Hostname will be shown in ps status
# and in logs if connections are logged
log_statement = on
# Log all statements
log_per_node_statement = on
# Log all statements
# with node and backend informations
log_standby_delay = 'if_over_threshold'
# Log standby delay
# Valid values are combinations of
always,
# if_over_threshold, none
# - Syslog specific -
syslog_facility = 'LOCAL0'
# Syslog local facility. Default to
LOCAL0
syslog_ident = 'pgpool'
# Syslog program identification string
# Default to 'pgpool'
# - Debug -
debug_level = 0
# Debug message verbosity level
# 0 means no message, 1 or more mean
verbose
#---------------------------------------------------------------------------
---
# FILE LOCATIONS
#---------------------------------------------------------------------------
---
pid_file_name = '/var/run/pgpool/pgpool.pid'
# PID file name
# (change requires restart)
logdir = '/var/log/pgpool'
# Directory of pgPool status file
# (change requires restart)
#---------------------------------------------------------------------------
---
# CONNECTION POOLING
#---------------------------------------------------------------------------
---
connection_cache = on
# Activate connection pools
# (change requires restart)
# Semicolon separated list of queries
# to be issued at the end of a session
# The default is for 8.3 and later
reset_query_list = 'ABORT; DISCARD ALL'
# The following one is for 8.2 and before
#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
#---------------------------------------------------------------------------
---
# REPLICATION MODE
#---------------------------------------------------------------------------
---
replication_mode = off
# Activate replication mode
# (change requires restart)
replicate_select = off
# Replicate SELECT statements
# when in replication or parallel mode
# replicate_select is higher priority
than
# load_balance_mode.
insert_lock = off
# Automatically locks a dummy row or a
table
# with INSERT statements to keep SERIAL
data
# consistency
# Without SERIAL, no lock will be issued
lobj_lock_table = ''
# When rewriting lo_creat command in
# replication mode, specify table name to
# lock
# - Degenerate handling -
replication_stop_on_mismatch = off
# On disagreement with the packet kind
# sent from backend, degenerate the node
# which is most likely "minority"
# If off, just force to exit this session
failover_if_affected_tuples_mismatch = off
# On disagreement with the number of
affected
# tuples in UPDATE/DELETE queries, then
# degenerate the node which is most
likely
# "minority".
# If off, just abort the transaction to
# keep the consistency
#---------------------------------------------------------------------------
---
# LOAD BALANCING MODE
#---------------------------------------------------------------------------
---
load_balance_mode = on
# Activate load balancing mode
# (change requires restart)
ignore_leading_white_space = on
# Ignore leading white spaces of each
query
white_function_list = ''
# Comma separated list of function names
# that don't write to database
# Regexp are accepted
black_function_list = 'currval,lastval,nextval,setval'
# Comma separated list of function names
# that write to database
# Regexp are accepted
#---------------------------------------------------------------------------
---
# MASTER/SLAVE MODE
#---------------------------------------------------------------------------
---
master_slave_mode = on
# Activate master/slave mode
# (change requires restart)
master_slave_sub_mode = 'stream'
# Master/slave sub mode
# Valid values are combinations slony or
# stream. Default is slony.
# (change requires restart)
# - Streaming -
sr_check_period = 10
# Streaming replication check period
# Disabled (0) by default
sr_check_user = 'postgres'
# Streaming replication check user
# This is neccessary even if you disable
streaming
# replication delay check by
sr_check_period = 0
sr_check_password = ''
# Password for streaming replication
check user
delay_threshold = 10000000
# Threshold before not dispatching query
to standby node
# Unit is in bytes
# Disabled (0) by default
# - Special commands -
follow_master_command = ''
# Executes this command after master
failover
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %% = '%' character
#---------------------------------------------------------------------------
---
# PARALLEL MODE AND QUERY CACHE
#---------------------------------------------------------------------------
---
parallel_mode = off
# Activates parallel query mode
# (change requires restart)
enable_query_cache = off
# Activates query cache
# (change requires restart)
pgpool2_hostname = ''
# Set pgpool2 hostname
# (change requires restart)
# - System DB info -
system_db_hostname = 'localhost'
# (change requires restart)
system_db_port = 5432
# (change requires restart)
system_db_dbname = 'pgpool'
# (change requires restart)
system_db_schema = 'pgpool_catalog'
# (change requires restart)
system_db_user = 'pgpool'
# (change requires restart)
system_db_password = ''
# (change requires restart)
#---------------------------------------------------------------------------
---
# HEALTH CHECK
#---------------------------------------------------------------------------
---
health_check_period = 10
# Health check period
# Disabled (0) by default
health_check_timeout = 20
# Health check timeout
# 0 means no timeout
health_check_user = 'postgres'
# Health check user
health_check_password = ''
# Password for health check user
#---------------------------------------------------------------------------
---
# FAILOVER AND FAILBACK
#---------------------------------------------------------------------------
---
failover_command = '/etc/failover.sh %d "%h" %p %D %m %M "%H" %P'
# Executes this command at failover
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %% = '%' character
failback_command = '/bin/rm -f /var/log/pgpool/trigger/trigger_file1'
# Executes this command at failback.
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %% = '%' character
fail_over_on_backend_error = on
# Initiates failover when writing to the
# backend communication socket fails
# This is the same behaviour of pgpool-II
# 2.2.x and previous releases
# If set to off, pgpool will report an
# error and disconnect the session.
#---------------------------------------------------------------------------
---
# ONLINE RECOVERY
#---------------------------------------------------------------------------
---
recovery_user = 'postgres'
# Online recovery user
recovery_password = ''
# Online recovery password
recovery_1st_stage_command = 'basebackup.sh'
# Executes a command in first stage
recovery_2nd_stage_command = ''
# Executes a command in second stage
recovery_timeout = 90
# Timeout in seconds to wait for the
# recovering node's postmaster to start
up
# 0 means no wait
client_idle_limit_in_recovery = 0
# Client is disconnected after being idle
# for that many seconds in the second
stage
# of online recovery
# 0 means no disconnection
# -1 means immediate disconnection
#---------------------------------------------------------------------------
---
# OTHERS
#---------------------------------------------------------------------------
---
relcache_expire = 0
# Life time of relation cache in seconds.
# 0 means no cache expiration(the
default).
# The relation cache is used for cache
the
# query result against PostgreSQL system
# catalog to obtain various information
# including table structures or if it's a
# temporary table or not. The cache is
# maintained in a pgpool child local
memory
# and being kept as long as it survives.
# If someone modify the table by using
# ALTER TABLE or some such, the relcache
is
# not consistent anymore.
# For this purpose, cache_expiration
# controls the life time of the cache.
Gales Romain
service informatique
e-mail: <mailto:romain.gales at act.etat.lu> romain.gales at act.etat.lu
Tel: +352 44901-250
<http://www.act.public.lu> http://www.act.public.lu
Description: logo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.sraoss.jp/pipermail/pgpool-general/attachments/20120308/b72a8fc7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 31368 bytes
Desc: not available
URL: <http://www.sraoss.jp/pipermail/pgpool-general/attachments/20120308/b72a8fc7/attachment-0001.jpg>
More information about the pgpool-general
mailing list