watchdog_setup

Name

watchdog_setup --  Create a temporary installation of Pgpool-II clusters with watchdog

Synopsis

watchdog_setup [option...]

Description

watchdog_setup creates a temporary installation of Pgpool-II clusters with watchdog enabled, which includes a Pgpool-II installation and specified number of PostgreSQL installations under current directory. Current directory must be empty before running watchdog_setup.

watchdog_setup is for testing purpose only and should not be used to create production installations. Also please note that heartbeat is not used.

watchdog_setup uses pgpool_setup as a workhorse.

Currently watchdog_setup supports streaming replication mode, snapshot isolation mode, native replication mode, logical replication mode and raw mode.

Options

watchdog_setup accepts the following command-line arguments:

-wn num_pgpool

Specifies the number of Pgpool-II installations. If this is omitted, 3 is used.

-wp watchdog_base_port

Specify the starting base port number used by Pgpool-II and PostgreSQL. For the first Pgpool-II, Pgpool-II port is watchdog_base_port. pcp port is watchdog_base_port + 1, watchdog port is watchdog_base_port + 2. wd_heartbeat_port is watchdog_base_port + 3 (though heartbeat is not used). The first PostgreSQL node's port is watchdog_base_port + 4, second PostgreSQL node's port is watchdog_base_port + 5 and so on.

If this is omitted, 50000 is used.

-m mode

Specifies the running mode. mode can be r (native replication mode), i (snapshot isolation mode), s (streaming replication mode), l (logical replication mode) or n (raw mode). If this is omitted, s is used.

-n num_clusters

Specifies the number of PostgreSQL installations. If this is omitted, 2 is used.

--no-stop

Do not stop pgpool and PostgreSQL after the work.

-d

Start pgpool with debug mode.

Environment variables

watchdog_setup recognizes following environment variables:

PGPOOL_SETUP

Specifies the path to pgpool_setup command. The default is "pgpool_setup", thus it is assumed that pgpool_setup is in the command search path.

PGPOOL_INSTALL_DIR

Specifies the Pgpool-II installation directory. Pgpool-II binaries is expected to be placed under PGPOOL_INSTALL_DIR/bin and pgpool.conf and pool_hba.conf etc. are expected to be placed under PGPOOL_INSTALL_DIR/etc. The default is /usr/local.

PGPOOLDIR

Specifies the path to Pgpool-II configuration files. The default is PGPOOL_INSTALL_DIR/etc.

PGBIN

Specifies the path to PostgreSQL commands such as initdb, pg_ctl and psql. The default is /usr/local/pgsql/bin.

PGLIB

Specifies the path to PostgreSQL shared libraries. The default is /usr/local/pgsql/lib.

PGSOCKET_DIR

Specifies the path to Unix socket directory. The default is /tmp.

INITDBARG

Specifies the arguments for initdb command. The default is "--no-locale -E UTF_8".

Example

    $ watchdog_setup
    Starting set up
    ============= setting up pgpool 0 =============
    Starting set up in streaming replication mode
    creating startall and shutdownall
    creating failover script
    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/data0...done.
    update postgresql.conf
    creating pgpool_remote_start
    creating basebackup.sh
    creating recovery.conf
    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/data1...done.
    update postgresql.conf
    creating pgpool_remote_start
    creating basebackup.sh
    creating recovery.conf
    temporarily start data0 cluster to create extensions
    temporarily start pgpool-II to create standby nodes
    INFO:  unrecognized configuration parameter "debug_level"
    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay
    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------
    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0
    1       | /tmp     | 51001 | down   | 0.500000  | standby | 0          | false             | 0
    (2 rows)

    recovery node 1...pcp_recovery_node -- Command Successful
    done.
    creating follow primary script
    Pager usage is off.
    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay
    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------
    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | false             | 0
    1       | /tmp     | 51001 | up     | 0.500000  | standby | 0          | true              | 0
    (2 rows)

    shutdown all

    pgpool-II setting for streaming replication mode is done.
    To start the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/startall.
    To shutdown the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool0/shutdownall.
    pcp command user name is "t-ishii", password is "t-ishii".
    Each PostgreSQL, pgpool-II and pcp port is as follows:
    #1 port is 51000
    #2 port is 51001
    pgpool port is 50000
    pcp port is 50001
    The info above is in README.port.
    ============= setting up pgpool 1 =============
    Starting set up in streaming replication mode
    creating startall and shutdownall
    creating failover script
    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/data0...done.
    update postgresql.conf
    creating pgpool_remote_start
    creating basebackup.sh
    creating recovery.conf
    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/data1...done.
    update postgresql.conf
    creating pgpool_remote_start
    creating basebackup.sh
    creating recovery.conf
    temporarily start data0 cluster to create extensions
    temporarily start pgpool-II to create standby nodes
    INFO:  unrecognized configuration parameter "debug_level"
    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay
    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------
    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0
    1       | /tmp     | 51001 | down   | 0.500000  | standby | 0          | false             | 0
    (2 rows)

    recovery node 1...pcp_recovery_node -- Command Successful
    done.
    creating follow primary script
    Pager usage is off.
    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay
    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------
    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0
    1       | /tmp     | 51001 | up     | 0.500000  | standby | 0          | false             | 0
    (2 rows)

    shutdown all

    pgpool-II setting for streaming replication mode is done.
    To start the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/startall.
    To shutdown the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool1/shutdownall.
    pcp command user name is "t-ishii", password is "t-ishii".
    Each PostgreSQL, pgpool-II and pcp port is as follows:
    #1 port is 51000
    #2 port is 51001
    pgpool port is 50004
    pcp port is 50005
    The info above is in README.port.
    ============= setting up pgpool 2 =============
    Starting set up in streaming replication mode
    creating startall and shutdownall
    creating failover script
    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/data0...done.
    update postgresql.conf
    creating pgpool_remote_start
    creating basebackup.sh
    creating recovery.conf
    creating database cluster /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/data1...done.
    update postgresql.conf
    creating pgpool_remote_start
    creating basebackup.sh
    creating recovery.conf
    temporarily start data0 cluster to create extensions
    temporarily start pgpool-II to create standby nodes
    INFO:  unrecognized configuration parameter "debug_level"
    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay
    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------
    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0
    1       | /tmp     | 51001 | down   | 0.500000  | standby | 0          | false             | 0
    (2 rows)

    recovery node 1...pcp_recovery_node -- Command Successful
    done.
    creating follow primary script
    Pager usage is off.
    node_id | hostname | port  | status | lb_weight |  role   | select_cnt | load_balance_node | replication_delay
    ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------
    0       | /tmp     | 51000 | up     | 0.500000  | primary | 0          | true              | 0
    1       | /tmp     | 51001 | up     | 0.500000  | standby | 0          | false             | 0
    (2 rows)

    shutdown all

    pgpool-II setting for streaming replication mode is done.
    To start the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/startall.
    To shutdown the whole system, use /home/t-ishii/work/pgpool-II/current/pgpool2/src/test/a/pgpool2/shutdownall.
    pcp command user name is "t-ishii", password is "t-ishii".
    Each PostgreSQL, pgpool-II and pcp port is as follows:
    #1 port is 51000
    #2 port is 51001
    pgpool port is 50008
    pcp port is 50009
    The info above is in README.port.

    $ ls
    pgpool0  pgpool1  pgpool2  shutdownall	startall

    $ sh startall
    waiting for server to start....16123 2016-08-18 16:26:53 JST LOG:  redirecting log output to logging collector process
    16123 2016-08-18 16:26:53 JST HINT:  Future log output will appear in directory "pg_log".
    done
    server started
    waiting for server to start....16136 2016-08-18 16:26:54 JST LOG:  redirecting log output to logging collector process
    16136 2016-08-18 16:26:54 JST HINT:  Future log output will appear in directory "pg_log".
    done
    server started

    t-ishii@localhost: psql -p 50000 test

    Pager usage is off.
    psql (9.5.4)
    Type "help" for help.

    test=# \q

    $ pcp_watchdog_info -p 50001 -v
    Password:
    Watchdog Cluster Information
    Total Nodes              : 3
    Remote Nodes             : 2
	Member Remote Nodes      : 2
	Nodes required for quorum: 2
    Quorum state             : QUORUM EXIST
    Alive Remote Nodes       : 2
    VIP up on local node     : NO
    Leader Node Name         : Linux_tishii-CF-SX3HE4BP_50004
    Leader Host Name         : localhost

    Watchdog Node Information
    Node Name         : Linux_tishii-CF-SX3HE4BP_50000
    Host Name         : localhost
    Delegate IP       : Not_Set
    Pgpool port       : 50000
    Watchdog port     : 50002
    Node priority     : 1
    Status            : 7
    Status Name       : STANDBY
	Membership Status : MEMBER

    Node Name         : Linux_tishii-CF-SX3HE4BP_50004
    Host Name         : localhost
    Delegate IP       : Not_Set
    Pgpool port       : 50004
    Watchdog port     : 50006
    Node priority     : 1
    Status            : 4
    Status Name       : LEADER
	Membership Status : MEMBER

    Node Name         : Linux_tishii-CF-SX3HE4BP_50008
    Host Name         : localhost
    Delegate IP       : Not_Set
    Pgpool port       : 50008
    Watchdog port     : 50010
    Node priority     : 1
    Status            : 7
    Status Name       : STANDBY
	Membership Status : MEMBER