[pgpool-general: 5264] Re: PGPOOL lb issue

Lazaro Garcia lazaro3487 at gmail.com
Tue Jan 17 05:22:23 JST 2017


For these kind of functions you could use the black_function_list configuration parameter. Any function defined will be sent to master server only.

 

Regards. 

 

De: ahmad milani [mailto:milani.ahmad at gmail.com] 
Enviado el: lunes, 16 de enero de 2017 2:24
Para: Lazaro Garcia
CC: pgpool-general at pgpool.net
Asunto: Re: [pgpool-general: 5235] PGPOOL lb issue

 

Hi,

 

There is no issue reported in the logs.

After furtur investigation i suspect the the issue is related to stored procedures, as i have many of them, they have if stetment and if a condition is met they might do delete, insert or .... i dont think that pgpool is handeling these correctly. How can i address this?

 

Cheers

On Mon, 16 Jan 2017 at 22:09, Lazaro Garcia <lazaro3487 at gmail.com <mailto:lazaro3487 at gmail.com> > wrote:

What info is logged inside pgpool.log because each sr_check_period pgpool check the node status for detecting the primary and slaves?? Is there any error in your log file??

 

Regards.

 

De: ahmad milani [mailto:milani.ahmad at gmail.com <mailto:milani.ahmad at gmail.com> ] 
Enviado el: lunes, 16 de enero de 2017 10:00
Para: Lazaro Garcia
CC: pgpool-general at pgpool.net <mailto:pgpool-general at pgpool.net> 
Asunto: Re: [pgpool-general: 5235] PGPOOL lb issue

 

Hi Lazaro,

 

pgpool can connect to the postgresql dbs with user pgpool and pass:

 psql -U pgpool -W  --dbname=postgres --host pgdb2 -c "\l"

Password for user pgpool: 

                                   List of databases

   Name    |   Owner    | Encoding |   Collate   |    Ctype    |   Access privileges   

-----------+------------+----------+-------------+-------------+-----------------------

 postgres  | postgres   | UTF8     | en_US.UTF-8 | en_US.UTF-8 | 

 repmgr    | repmgr     | UTF8     | en_US.UTF-8 | en_US.UTF-8 | 

 template0 | postgres   | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =c/postgres          +

           |            |          |             |             | postgres=CTc/postgres

 template1 | postgres   | UTF8     | en_US.UTF-8 | en_US.UTF-8 | =c/postgres          +

 

 test2     | postgres   | UTF8     | en_US.UTF-8 | en_US.UTF-8 | 

 test3     | postgres   | UTF8     | en_US.UTF-8 | en_US.UTF-8 | 

 

Im doing an insert query. 

Ty

 

On Mon, Jan 16, 2017 at 6:01 PM, Lazaro Garcia <lazaro3487 at gmail.com <mailto:lazaro3487 at gmail.com> > wrote:

What about postgresql node info in pgpool ? 

 

Can pgpool connect to postgresql servers throw pgpool user with pool password?

 

sr_check_user = 'pgpool'

                                   # Streaming replication check user

                                   # This is neccessary even if you disable streaming

                                   # replication delay check by sr_check_period = 0

sr_check_password = 'pool'

 

Is the write query an Insert, Update or Delete? The write query is any select over an store procedure?

 

Regards.

 

De: pgpool-general-bounces at pgpool.net <mailto:pgpool-general-bounces at pgpool.net>  [mailto:pgpool-general-bounces at pgpool.net <mailto:pgpool-general-bounces at pgpool.net> ] En nombre de ahmad milani
Enviado el: lunes, 16 de enero de 2017 5:32
Para: pgpool-general at pgpool.net <mailto:pgpool-general at pgpool.net> 
Asunto: [pgpool-general: 5235] PGPOOL lb issue

 

Hi,




I have in issue with pgpool2 and cannot figure out why!!!! my setup is as follows:

singe pgpool to do LB for me

master slave postgress

The issue is as follows, when i send read queries via the pgpool everything is fine, load get distributed between and master and salve.

but when im doing a query that writes to the database the pgpool again uses both slave and master and it yeilds error on queries sent to slave.

I have installed 96 on centos.

 

# ----------------------------

# pgPool-II configuration file

# ----------------------------

#

# This file consists of lines of the form:

#

#   name = value

#

# Whitespace may be used.  Comments are introduced with "#" anywhere on a line.

# The complete list of parameter names and allowed values can be found in the

# pgPool-II documentation.

#

# This file is read on server startup and when the server receives a SIGHUP

# signal.  If you edit the file on a running system, you have to SIGHUP the

# server for the changes to take effect, or use "pgpool reload".  Some

# parameters, which are marked below, require a server shutdown and restart to

# take effect.

#

 

 

#------------------------------------------------------------------------------

# CONNECTIONS

#------------------------------------------------------------------------------

 

# - pgpool Connection Settings -

 

listen_addresses = '*'

                                   # Host name or IP address to listen on:

                                   # '*' for all, '' for no TCP/IP connections

                                   # (change requires restart)

port = 5432

                                   # Port number

                                   # (change requires restart)

socket_dir = '/tmp'

                                   # Unix domain socket path

                                   # The Debian package defaults to

                                   # /var/run/postgresql

                                   # (change requires restart)

 

 

# - pgpool Communication Manager Connection Settings -

 

pcp_listen_addresses = '*'

                                   # Host name or IP address for pcp process to listen on:

                                   # '*' for all, '' for no TCP/IP connections

                                   # (change requires restart)

pcp_port = 9898

                                   # Port number for pcp

                                   # (change requires restart)

pcp_socket_dir = '/tmp'

                                   # Unix domain socket path for pcp

                                   # The Debian package defaults to

                                   # /var/run/postgresql

                                   # (change requires restart)

listen_backlog_multiplier = 2

                                   # Set the backlog parameter of listen(2) to

   # num_init_children * listen_backlog_multiplier.

                                   # (change requires restart)

serialize_accept = off

                                   # whether to serialize accept() call to avoid thundering herd problem

                                   # (change requires restart)

 

# - Backend Connection Settings -

 

backend_hostname0 = 'pgdb1'

                                   # Host name or IP address to connect to for backend 0

backend_port0 = 5432

                                   # Port number for backend 0

backend_weight0 = 1

                                   # Weight for backend 0 (only in load balancing mode)

backend_data_directory0 = '/var/lib/pgsql/9.5/data'

                                   # Data directory for backend 0

backend_flag0 = 'ALLOW_TO_FAILOVER'

                                   # Controls various backend behavior

                                   # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER

backend_hostname1 = 'pgdb2'

backend_port1 = 5432

backend_weight1 = 1

backend_data_directory1 = '/var/lib/pgsql/9.5/data'

backend_flag1 = 'ALLOW_TO_FAILOVER'

 

# - Authentication -

 

enable_pool_hba = on

                                   # Use pool_hba.conf for client authentication

pool_passwd = 'pool_passwd'

                                   # File name of pool_passwd for md5 authentication.

                                   # "" disables pool_passwd.

                                   # (change requires restart)

authentication_timeout = 60

                                   # Delay in seconds to complete client authentication

                                   # 0 means no timeout.

 

# - SSL Connections -

 

ssl = off

                                   # Enable SSL support

                                   # (change requires restart)

#ssl_key = './server.key'

                                   # Path to the SSL private key file

                                   # (change requires restart)

#ssl_cert = './server.cert'

                                   # Path to the SSL public certificate file

                                   # (change requires restart)

#ssl_ca_cert = ''

                                   # Path to a single PEM format file

                                   # containing CA root certificate(s)

                                   # (change requires restart)

#ssl_ca_cert_dir = ''

                                   # Directory containing CA root certificate(s)

                                   # (change requires restart)

 

 

#------------------------------------------------------------------------------

# POOLS

#------------------------------------------------------------------------------

 

# - Concurrent session and pool size -

 

num_init_children = 32

                                   # Number of concurrent sessions allowed

                                   # (change requires restart)

max_pool = 4

                                   # Number of connection pool caches per connection

                                   # (change requires restart)

 

# - Life time -

 

child_life_time = 300

                                   # Pool exits after being idle for this many seconds

child_max_connections = 0

                                   # Pool exits after receiving that many connections

                                   # 0 means no exit

connection_life_time = 0

                                   # Connection to backend closes after being idle for this many seconds

                                   # 0 means no close

client_idle_limit = 0

                                   # Client is disconnected after being idle for that many seconds

                                   # (even inside an explicit transactions!)

                                   # 0 means no disconnection

 

 

#------------------------------------------------------------------------------

# LOGS

#------------------------------------------------------------------------------

 

# - Where to log -

 

log_destination = 'stderr'

                                   # Where to log

                                   # Valid values are combinations of stderr,

                                   # and syslog. Default to stderr.

 

# - What to log -

 

log_line_prefix = '%t: pid %p: '   # printf-style string to output at beginning of each log line.

 

log_connections = off

                                   # Log connections

log_hostname = off

                                   # Hostname will be shown in ps status

                                   # and in logs if connections are logged

log_statement = off

                                   # Log all statements

log_per_node_statement = off

                                   # Log all statements

                                   # with node and backend informations

log_standby_delay = 'if_over_threshold'

                                   # Log standby delay

                                   # Valid values are combinations of always,

                                   # if_over_threshold, none

 

# - Syslog specific -

 

syslog_facility = 'LOCAL0'

                                   # Syslog local facility. Default to LOCAL0

syslog_ident = 'pgpool'

                                   # Syslog program identification string

                                   # Default to 'pgpool'

 

# - Debug -

 

debug_level = 0

                                   # Debug message verbosity level

                                   # 0 means no message, 1 or more mean verbose

 

#log_error_verbosity = default          # terse, default, or verbose messages

 

#client_min_messages = notice           # values in order of decreasing detail:

                                        #   debug5

                                        #   debug4

                                        #   debug3

                                        #   debug2

                                        #   debug1

                                        #   log

                                        #   notice

                                        #   warning

                                        #   error

 

#log_min_messages = warning             # values in order of decreasing detail:

                                        #   debug5

                                        #   debug4

                                        #   debug3

                                        #   debug2

                                        #   debug1

                                        #   info

                                        #   notice

                                        #   warning

                                        #   error

                                        #   log

                                        #   fatal

                                        #   panic

 

#------------------------------------------------------------------------------

# FILE LOCATIONS

#------------------------------------------------------------------------------

 

pid_file_name = '/var/run/pgpool-II-95/pgpool.pid'

                                   # PID file name

                                   # (change requires restart)

logdir = '/tmp'

                                   # Directory of pgPool status file

                                   # (change requires restart)

 

 

#------------------------------------------------------------------------------

# CONNECTION POOLING

#------------------------------------------------------------------------------

 

connection_cache = on

                                   # Activate connection pools

                                   # (change requires restart)

 

                                   # Semicolon separated list of queries

                                   # to be issued at the end of a session

                                   # The default is for 8.3 and later

reset_query_list = 'ABORT; DISCARD ALL'

                                   # The following one is for 8.2 and before

#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'

 

 

#------------------------------------------------------------------------------

# REPLICATION MODE

#------------------------------------------------------------------------------

 

replication_mode = off

                                   # Activate replication mode

                                   # (change requires restart)

replicate_select = off

                                   # Replicate SELECT statements

                                   # when in replication mode

                                   # replicate_select is higher priority than

                                   # load_balance_mode.

 

insert_lock = off

                                   # Automatically locks a dummy row or a table

                                   # with INSERT statements to keep SERIAL data

                                   # consistency

                                   # Without SERIAL, no lock will be issued

lobj_lock_table = ''

                                   # When rewriting lo_creat command in

                                   # replication mode, specify table name to

                                   # lock

 

# - Degenerate handling -

 

replication_stop_on_mismatch = off

                                   # On disagreement with the packet kind

                                   # sent from backend, degenerate the node

                                   # which is most likely "minority"

                                   # If off, just force to exit this session

 

failover_if_affected_tuples_mismatch = off

                                   # On disagreement with the number of affected

                                   # tuples in UPDATE/DELETE queries, then

                                   # degenerate the node which is most likely

                                   # "minority".

                                   # If off, just abort the transaction to

                                   # keep the consistency

 

 

#------------------------------------------------------------------------------

# LOAD BALANCING MODE

#------------------------------------------------------------------------------

 

load_balance_mode = on

                                   # Activate load balancing mode

                                   # (change requires restart)

ignore_leading_white_space = on

                                   # Ignore leading white spaces of each query

white_function_list = ''

                                   # Comma separated list of function names

                                   # that don't write to database

                                   # Regexp are accepted

black_function_list = 'currval,lastval,nextval,setval'

                                   # Comma separated list of function names

                                   # that write to database

                                   # Regexp are accepted

 

database_redirect_preference_list = ''

   # comma separated list of pairs of database and node id.

   # example: postgres:primary,mydb[0-4]:1,mydb[5-9]:2'

   # valid for streaming replicaton mode only.

 

app_name_redirect_preference_list = ''

   # comma separated list of pairs of app name and node id.

   # example: 'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'

   # valid for streaming replicaton mode only.

allow_sql_comments = off

   # if on, ignore SQL comments when judging if load balance or

   # query cache is possible.

   # If off, SQL comments effectively prevent the judgment

   # (pre 3.4 behavior).

 

#------------------------------------------------------------------------------

# MASTER/SLAVE MODE

#------------------------------------------------------------------------------

 

master_slave_mode = on

                                   # Activate master/slave mode

                                   # (change requires restart)

master_slave_sub_mode = 'stream'

                                   # Master/slave sub mode

                                   # Valid values are combinations slony or

                                   # stream. Default is slony.

                                   # (change requires restart)

 

# - Streaming -

 

sr_check_period = 10

                                   # Streaming replication check period

                                   # Disabled (0) by default

sr_check_user = 'pgpool'

                                   # Streaming replication check user

                                   # This is neccessary even if you disable streaming

                                   # replication delay check by sr_check_period = 0

sr_check_password = 'pool'

                                   # Password for streaming replication check user

sr_check_database = 'postgres'

                                   # Database name for streaming replication check

delay_threshold = 10000000

                                   # Threshold before not dispatching query to standby node

                                   # Unit is in bytes

                                   # Disabled (0) by default

 

# - Special commands -

 

follow_master_command = ''

                                   # Executes this command after master failover

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

   #   %r = new master port number

   #   %R = new master database cluster path

                                   #   %% = '%' character

 

#------------------------------------------------------------------------------

# HEALTH CHECK

#------------------------------------------------------------------------------

 

health_check_period = 10

                                   # Health check period

                                   # Disabled (0) by default

health_check_timeout = 20

                                   # Health check timeout

                                   # 0 means no timeout

health_check_user = 'pgpool'

                                   # Health check user

health_check_password = 'pool'

                                   # Password for health check user

health_check_database = ''

                                   # Database name for health check. If '', tries 'postgres' frist, 

health_check_max_retries = 0

                                   # Maximum number of times to retry a failed health check before giving up.

health_check_retry_delay = 1

                                   # Amount of time to wait (in seconds) between retries.

connect_timeout = 10000

                                   # Timeout value in milliseconds before giving up to connect to backend.

   # Default is 10000 ms (10 second). Flaky network user may want to increase

   # the value. 0 means no timeout.

   # Note that this value is not only used for health check,

   # but also for ordinary conection to backend.

 

#------------------------------------------------------------------------------

# FAILOVER AND FAILBACK

#------------------------------------------------------------------------------

 


p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 16.0px '.SF UI Text'}
span.s1 {font-family: '.SFUIText'; font-weight: normal; font-style: normal; font-size: 16.00pt}

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.sraoss.jp/pipermail/pgpool-general/attachments/20170116/704d6897/attachment-0001.html>


More information about the pgpool-general mailing list