[pgpool-general: 4631] Re: md5 authentication with pgpool
Daniel Gallo
danielito.gallo at gmail.com
Sat Apr 9 02:17:33 JST 2016
Yes Tatsuo we have encrypted the postgres user in both servers
SELECT * from pg_shadow a WHERE a.usename='postgres';
postgres 10 t t t t md59798b5eb1000b9fad41c78e5a3dccxxx
Is diferent a pcp.conf
# USERID:MD5PASSWD
postgres:5c0435eee0f211f150e980e459151xxx
thanks again for your time!!
2016-04-07 23:57 GMT-03:00 Tatsuo Ishii <ishii at postgresql.org>:
> pg_hba.conf looks good. So the user in question has encrypted
> password on the both PostgreSQL server? You can check it by looking at
> pg_shadow (needs PostgreSQL super user privilege). The "password"
> column should look something like "md5.....".
>
> Best regards,
> --
> Tatsuo Ishii
> SRA OSS, Inc. Japan
> English: http://www.sraoss.co.jp/index_en.php
> Japanese:http://www.sraoss.co.jp
>
> > Thanks a lots for your time!!!!
> >
> > Master pgpool.conf and pg_hba.conf
> >
> > # ----------------------------
> > # pgPool-II configuration file
> > # ----------------------------
> > #
> > # This file consists of lines of the form:
> > #
> > # name = value
> > #
> > # Whitespace may be used. Comments are introduced with "#" anywhere on a
> > line.
> > # The complete list of parameter names and allowed values can be found in
> > the
> > # pgPool-II documentation.
> > #
> > # This file is read on server startup and when the server receives a
> SIGHUP
> > # signal. If you edit the file on a running system, you have to SIGHUP
> the
> > # server for the changes to take effect, or use "pgpool reload". Some
> > # parameters, which are marked below, require a server shutdown and
> restart
> > to
> > # take effect.
> > #
> >
> >
> >
> #------------------------------------------------------------------------------
> > # CONNECTIONS
> >
> #------------------------------------------------------------------------------
> >
> > # - pgpool Connection Settings -
> >
> > listen_addresses = '*'
> > # Host name or IP address to listen
> on:
> > # '*' for all, '' for no TCP/IP
> > connections
> > # (change requires restart)
> > port = 9999
> > # Port number
> > # (change requires restart)
> > socket_dir = '/tmp'
> > # Unix domain socket path
> > # The Debian package defaults to
> > # /var/run/postgresql
> > # (change requires restart)
> >
> >
> > # - pgpool Communication Manager Connection Settings -
> >
> > pcp_listen_addresses = '*'
> > # Host name or IP address for pcp
> > process to listen on:
> > # '*' for all, '' for no TCP/IP
> > connections
> > # (change requires restart)
> > pcp_port = 9898
> > # Port number for pcp
> > # (change requires restart)
> > pcp_socket_dir = '/tmp'
> > # Unix domain socket path for pcp
> > # The Debian package defaults to
> > # /var/run/postgresql
> > # (change requires restart)
> > listen_backlog_multiplier = 2
> > # Set the backlog parameter of
> listen(2)
> > to
> > # num_init_children * listen_backlog_multiplier.
> > # (change requires restart)
> >
> > # - Backend Connection Settings -
> >
> > # Host name or IP address to connect
> to
> > for backend 0
> > # Port number for backend 0
> > # Weight for backend 0 (only in load
> > balancing mode)
> > # Data directory for backend 0
> > # Controls various backend behavior
> > # ALLOW_TO_FAILOVER or
> > DISALLOW_TO_FAILOVER
> >
> > # - Authentication -
> >
> > enable_pool_hba = on
> > # Use pool_hba.conf for client
> > authentication
> > pool_passwd = 'pool_passwd'
> > # File name of pool_passwd for md5
> > authentication.
> > # "" disables pool_passwd.
> > # (change requires restart)
> > authentication_timeout = 60
> > # Delay in seconds to complete client
> > authentication
> > # 0 means no timeout.
> >
> > # - SSL Connections -
> >
> > ssl = off
> > # Enable SSL support
> > # (change requires restart)
> > #ssl_key = './server.key'
> > # Path to the SSL private key file
> > # (change requires restart)
> > #ssl_cert = './server.cert'
> > # Path to the SSL public certificate
> file
> > # (change requires restart)
> > #ssl_ca_cert = ''
> > # Path to a single PEM format file
> > # containing CA root certificate(s)
> > # (change requires restart)
> > #ssl_ca_cert_dir = ''
> > # Directory containing CA root
> > certificate(s)
> > # (change requires restart)
> >
> >
> >
> #------------------------------------------------------------------------------
> > # POOLS
> >
> #------------------------------------------------------------------------------
> >
> > # - Pool size -
> >
> > num_init_children = 32
> > # Number of pools
> > # (change requires restart)
> > max_pool = 4
> > # Number of connections per pool
> > # (change requires restart)
> >
> > # - Life time -
> >
> > child_life_time = 300
> > # Pool exits after being idle for this
> > many seconds
> > child_max_connections = 0
> > # Pool exits after receiving that many
> > connections
> > # 0 means no exit
> > connection_life_time = 0
> > # Connection to backend closes after
> > being idle for this many seconds
> > # 0 means no close
> > client_idle_limit = 0
> > # Client is disconnected after being
> > idle for that many seconds
> > # (even inside an explicit
> transactions!)
> > # 0 means no disconnection
> >
> >
> >
> #------------------------------------------------------------------------------
> > # LOGS
> >
> #------------------------------------------------------------------------------
> >
> > # - Where to log -
> >
> > log_destination = 'syslog'
> > # Where to log
> > # Valid values are combinations of
> > stderr,
> > # and syslog. Default to stderr.
> >
> > # - What to log -
> >
> > log_line_prefix = '%t: pid %p: # printf-style string to output at
> > beginning of each log line.'
> >
> > log_connections = off
> > # Log connections
> > log_hostname = on
> > # Hostname will be shown in ps status
> > # and in logs if connections are
> logged
> > log_statement = on
> > # Log all statements
> > log_per_node_statement = on
> > # Log all statements
> > # with node and backend informations
> > log_standby_delay = 'if_over_threshold'
> > # Log standby delay
> > # Valid values are combinations of
> > always,
> > # if_over_threshold, none
> >
> > # - Syslog specific -
> >
> > syslog_facility = 'LOCAL0'
> > # Syslog local facility. Default to
> > LOCAL0
> > syslog_ident = 'pgpool'
> > # Syslog program identification string
> > # Default to 'pgpool'
> >
> > # - Debug -
> >
> > debug_level = 5
> > # Debug message verbosity level
> > # 0 means no message, 1 or more mean
> > verbose
> >
> > log_error_verbosity = 'DEFAULT'
> >
> > #client_min_messages = notice # values in order of decreasing
> > detail:
> > # debug5
> > # debug4
> > # debug3
> > # debug2
> > # debug1
> > # log
> > # notice
> > # warning
> > # error
> >
> > #log_min_messages = warning # values in order of decreasing
> > detail:
> > # debug5
> > # debug4
> > # debug3
> > # debug2
> > # debug1
> > # info
> > # notice
> > # warning
> > # error
> > # log
> > # fatal
> > # panic
> >
> >
> #------------------------------------------------------------------------------
> > # FILE LOCATIONS
> >
> #------------------------------------------------------------------------------
> >
> > pid_file_name = '/var/run/pgpool/pgpool.pid'
> > # PID file name
> > # (change requires restart)
> > logdir = '/tmp'
> > # Directory of pgPool status file
> > # (change requires restart)
> >
> >
> >
> #------------------------------------------------------------------------------
> > # CONNECTION POOLING
> >
> #------------------------------------------------------------------------------
> >
> > connection_cache = on
> > # Activate connection pools
> > # (change requires restart)
> >
> > # Semicolon separated list of queries
> > # to be issued at the end of a session
> > # The default is for 8.3 and later
> > reset_query_list = 'ABORT; DISCARD ALL'
> > # The following one is for 8.2 and
> before
> > #reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
> >
> >
> >
> #------------------------------------------------------------------------------
> > # REPLICATION MODE
> >
> #------------------------------------------------------------------------------
> >
> > replication_mode = off
> > # Activate replication mode
> > # (change requires restart)
> > replicate_select = off
> > # Replicate SELECT statements
> > # when in replication mode
> > # replicate_select is higher priority
> > than
> > # load_balance_mode.
> >
> > insert_lock = off
> > # Automatically locks a dummy row or a
> > table
> > # with INSERT statements to keep
> SERIAL
> > data
> > # consistency
> > # Without SERIAL, no lock will be
> issued
> > lobj_lock_table = ''
> > # When rewriting lo_creat command in
> > # replication mode, specify table
> name to
> > # lock
> >
> > # - Degenerate handling -
> >
> > replication_stop_on_mismatch = off
> > # On disagreement with the packet kind
> > # sent from backend, degenerate the
> node
> > # which is most likely "minority"
> > # If off, just force to exit this
> session
> >
> > failover_if_affected_tuples_mismatch = off
> > # On disagreement with the number of
> > affected
> > # tuples in UPDATE/DELETE queries,
> then
> > # degenerate the node which is most
> > likely
> > # "minority".
> > # If off, just abort the transaction
> to
> > # keep the consistency
> >
> >
> >
> #------------------------------------------------------------------------------
> > # LOAD BALANCING MODE
> >
> #------------------------------------------------------------------------------
> >
> > load_balance_mode = on
> > # Activate load balancing mode
> > # (change requires restart)
> > ignore_leading_white_space = on
> > # Ignore leading white spaces of each
> > query
> > white_function_list = ''
> > # Comma separated list of function
> names
> > # that don't write to database
> > # Regexp are accepted
> > black_function_list = 'currval,lastval,nextval,setval'
> > # Comma separated list of function
> names
> > # that write to database
> > # Regexp are accepted
> >
> > database_redirect_preference_list = ''
> > # comma separated list of pairs of database and node id.
> > # example: postgres:primary,mydb[0-4]:1,mydb[5-9]:2'
> > # valid for streaming replicaton mode only.
> >
> > app_name_redirect_preference_list = ''
> > # comma separated list of pairs of app name and node id.
> > # example: 'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'
> > # valid for streaming replicaton mode only.
> > allow_sql_comments = off
> > # if on, ignore SQL comments when judging if load balance or
> > # query cache is possible.
> > # If off, SQL comments effectively prevent the judgment
> > # (pre 3.4 behavior).
> >
> >
> #------------------------------------------------------------------------------
> > # MASTER/SLAVE MODE
> >
> #------------------------------------------------------------------------------
> >
> > master_slave_mode = on
> > # Activate master/slave mode
> > # (change requires restart)
> > master_slave_sub_mode = 'stream'
> > # Master/slave sub mode
> > # Valid values are combinations slony
> or
> > # stream. Default is slony.
> > # (change requires restart)
> >
> > # - Streaming -
> >
> > sr_check_period = 0
> > # Streaming replication check period
> > # Disabled (0) by default
> > sr_check_user = 'postgres'
> > # Streaming replication check user
> > # This is neccessary even if you
> disable
> > streaming
> > # replication delay check by
> > sr_check_period = 0
> > sr_check_password = 'xxx'
> > # Password for streaming replication
> > check user
> > delay_threshold = 0
> > # Threshold before not dispatching
> query
> > to standby node
> > # Unit is in bytes
> > # Disabled (0) by default
> >
> > # - Special commands -
> >
> > follow_master_command = ''
> > # Executes this command after master
> > failover
> > # Special values:
> > # %d = node id
> > # %h = host name
> > # %p = port number
> > # %D = database cluster path
> > # %m = new master node id
> > # %H = hostname of the new master
> node
> > # %M = old master node id
> > # %P = old primary node id
> > # %r = new master port number
> > # %R = new master database cluster path
> > # %% = '%' character
> >
> >
> #------------------------------------------------------------------------------
> > # HEALTH CHECK
> >
> #------------------------------------------------------------------------------
> >
> > health_check_period = 5
> > # Health check period
> > # Disabled (0) by default
> > health_check_timeout = 0
> > # Health check timeout
> > # 0 means no timeout
> > health_check_user = 'postgres'
> > # Health check user
> > health_check_password = 'xxx'
> > # Password for health check user
> > health_check_max_retries = 0
> > # Maximum number of times to retry a
> > failed health check before giving up.
> > health_check_retry_delay = 1
> > # Amount of time to wait (in seconds)
> > between retries.
> > connect_timeout = 10000
> > # Timeout value in milliseconds before
> > giving up to connect to backend.
> > # Default is 10000 ms (10 second). Flaky network user may want to
> increase
> > # the value. 0 means no timeout.
> > # Note that this value is not only used for health check,
> > # but also for ordinary conection to backend.
> >
> >
> #------------------------------------------------------------------------------
> > # FAILOVER AND FAILBACK
> >
> #------------------------------------------------------------------------------
> >
> > failover_command = '/usr/local/etc/failover.sh %d %H
> > /var/log/pgpool/trigger/trigger_file0'
> > # Executes this command at failover
> > # Special values:
> > # %d = node id
> > # %h = host name
> > # %p = port number
> > # %D = database cluster path
> > # %m = new master node id
> > # %H = hostname of the new master
> node
> > # %M = old master node id
> > # %P = old primary node id
> > # %r = new master port number
> > # %R = new master database cluster path
> > # %% = '%' character
> > failback_command = ''
> > # Executes this command at failback.
> > # Special values:
> > # %d = node id
> > # %h = host name
> > # %p = port number
> > # %D = database cluster path
> > # %m = new master node id
> > # %H = hostname of the new master
> node
> > # %M = old master node id
> > # %P = old primary node id
> > # %r = new master port number
> > # %R = new master database cluster path
> > # %% = '%' character
> >
> > fail_over_on_backend_error = on
> > # Initiates failover when
> > reading/writing to the
> > # backend communication socket fails
> > # If set to off, pgpool will report an
> > # error and disconnect the session.
> >
> > search_primary_node_timeout = 10
> > # Timeout in seconds to search for the
> > # primary node when a failover occurs.
> > # 0 means no timeout, keep searching
> > # for a primary node forever.
> >
> >
> #------------------------------------------------------------------------------
> > # ONLINE RECOVERY
> >
> #------------------------------------------------------------------------------
> >
> > recovery_user = 'postgres'
> > # Online recovery user
> > recovery_password = 'xxx'
> > # Online recovery password
> > recovery_1st_stage_command = 'recovery_1st_stage'
> > # Executes a command in first stage
> > recovery_2nd_stage_command = ''
> > # Executes a command in second stage
> > recovery_timeout = 90
> > # Timeout in seconds to wait for the
> > # recovering node's postmaster to
> start
> > up
> > # 0 means no wait
> > client_idle_limit_in_recovery = 0
> > # Client is disconnected after being
> idle
> > # for that many seconds in the second
> > stage
> > # of online recovery
> > # 0 means no disconnection
> > # -1 means immediate disconnection
> >
> >
> >
> #------------------------------------------------------------------------------
> > # WATCHDOG
> >
> #------------------------------------------------------------------------------
> >
> > # - Enabling -
> >
> > use_watchdog = on
> > # Activates watchdog
> > # (change requires restart)
> >
> > # -Connection to up stream servers -
> >
> > trusted_servers = ''
> > # trusted server list which are used
> > # to confirm network connection
> > # (hostA,hostB,hostC,...)
> > # (change requires restart)
> > ping_path = '/bin'
> > # ping command path
> > # (change requires restart)
> >
> > # - Watchdog communication Settings -
> >
> > wd_hostname = 'SUYSevPrepDB01'
> > # Host name or IP address of this
> > watchdog
> > # (change requires restart)
> > wd_port = 9000
> > # port number for watchdog service
> > # (change requires restart)
> > wd_authkey = ''
> > # Authentication key for watchdog
> > communication
> > # (change requires restart)
> >
> > # - Virtual IP control Setting -
> >
> > delegate_IP = '192.168.140.112'
> > # delegate IP address
> > # If this is empty, virtual IP never
> > bring up.
> > # (change requires restart)
> > ifconfig_path = '/apachebin'
> > # ifconfig command path
> > # (change requires restart)
> > if_up_cmd = 'ifconfig eth1:0 inet $_IP_$ netmask 255.255.255.0'
> > # startup delegate IP command
> > # (change requires restart)
> > if_down_cmd = 'ifconfig eth1:0 down'
> > # shutdown delegate IP command
> > # (change requires restart)
> >
> > arping_path = '/apachebin'
> > # (change requires restart)
> >
> > arping_cmd = 'arping -I eth0 -U $_IP_$ -w 1'
> > # arping command
> > # (change requires restart)
> >
> > # - Behaivor on escalation Setting -
> >
> > clear_memqcache_on_escalation = on
> > # Clear all the query cache on shared
> > memory
> > # when standby pgpool escalate to
> > active pgpool
> > # (= virtual IP holder).
> > # This should be off if client
> connects
> > to pgpool
> > # not using virtual IP.
> > # (change requires restart)
> > wd_escalation_command = ''
> > # Executes this command at escalation
> > on new active pgpool.
> > # (change requires restart)
> >
> > # - Lifecheck Setting -
> >
> > # -- common --
> >
> > wd_lifecheck_method = 'heartbeat'
> > # Method of watchdog lifecheck
> > ('heartbeat' or 'query')
> > # (change requires restart)
> > wd_interval = 3
> > # lifecheck interval (sec) > 0
> > # (change requires restart)
> >
> > # -- heartbeat mode --
> >
> > wd_heartbeat_port = 9694
> > # Port number for receiving heartbeat
> > signal
> > # (change requires restart)
> > wd_heartbeat_keepalive = 2
> > # Interval time of sending heartbeat
> > signal (sec)
> > # (change requires restart)
> > wd_heartbeat_deadtime = 30
> > # Deadtime interval for heartbeat
> > signal (sec)
> > # (change requires restart)
> > # Host name or IP address of
> > destination 0
> > # for sending heartbeat signal.
> > # (change requires restart)
> > # Port number of destination 0 for
> > sending
> > # heartbeat signal. Usually this is
> the
> > # same as wd_heartbeat_port.
> > # (change requires restart)
> > # Name of NIC device (such like
> 'eth0')
> > # used for sending/receiving
> heartbeat
> > # signal to/from destination 0.
> > # This works only when this is not
> empty
> > # and pgpool has root privilege.
> > # (change requires restart)
> >
> > #heartbeat_destination1 = 'host0_ip2'
> > #heartbeat_destination_port1 = 9694
> > #heartbeat_device1 = ''
> >
> > # -- query mode --
> >
> > wd_life_point = 3
> > # lifecheck retry times
> > # (change requires restart)
> > wd_lifecheck_query = 'SELECT 1'
> > # lifecheck query to pgpool from
> > watchdog
> > # (change requires restart)
> > wd_lifecheck_dbname = 'template1'
> > # Database name connected for
> lifecheck
> > # (change requires restart)
> > wd_lifecheck_user = ''
> > # watchdog user monitoring pgpools in
> > lifecheck
> > # (change requires restart)
> > wd_lifecheck_password = ''
> > # Password for watchdog user in
> > lifecheck
> > # (change requires restart)
> >
> > # - Other pgpool Connection Settings -
> >
> > # Host name or IP address to connect
> to
> > for other pgpool 0
> > # (change requires restart)
> > # Port number for othet pgpool 0
> > # (change requires restart)
> > # Port number for othet watchdog 0
> > # (change requires restart)
> > #other_pgpool_hostname1 = 'host1'
> > #other_pgpool_port1 = 5432
> > #other_wd_port1 = 9000
> >
> >
> >
> #------------------------------------------------------------------------------
> > # OTHERS
> >
> #------------------------------------------------------------------------------
> > relcache_expire = 0
> > # Life time of relation cache in
> seconds.
> > # 0 means no cache expiration(the
> > default).
> > # The relation cache is used for cache
> > the
> > # query result against PostgreSQL
> system
> > # catalog to obtain various
> information
> > # including table structures or if
> it's a
> > # temporary table or not. The cache is
> > # maintained in a pgpool child local
> > memory
> > # and being kept as long as it
> survives.
> > # If someone modify the table by using
> > # ALTER TABLE or some such, the
> relcache
> > is
> > # not consistent anymore.
> > # For this purpose, cache_expiration
> > # controls the life time of the cache.
> > relcache_size = 256
> > # Number of relation cache
> > # entry. If you see frequently:
> > # "pool_search_relcache: cache replacement happend"
> > # in the pgpool log, you might want to increate this number.
> >
> > check_temp_table = on
> > # If on, enable temporary table check
> in
> > SELECT statements.
> > # This initiates queries against
> system
> > catalog of primary/master
> > # thus increases load of master.
> > # If you are absolutely sure that your system never uses temporary
> tables
> > # and you want to save access to primary/master, you could turn this
> off.
> > # Default is on.
> >
> > check_unlogged_table = off
> > # If on, enable unlogged table check
> in
> > SELECT statements.
> > # This initiates queries against
> system
> > catalog of primary/master
> > # thus increases load of master.
> > # If you are absolutely sure that your
> > system never uses unlogged tables
> > # and you want to save access to
> > primary/master, you could turn this off.
> > # Default is on.
> >
> >
> #------------------------------------------------------------------------------
> > # IN MEMORY QUERY MEMORY CACHE
> >
> #------------------------------------------------------------------------------
> > memory_cache_enabled = off
> > # If on, use the memory cache functionality, off by default
> > memqcache_method = 'shmem'
> > # Cache storage method. either 'shmem'(shared memory) or
> > # 'memcached'. 'shmem' by default
> > # (change requires restart)
> > memqcache_memcached_host = 'localhost'
> > # Memcached host name or IP address. Mandatory if
> > # memqcache_method = 'memcached'.
> > # Defaults to localhost.
> > # (change requires restart)
> > memqcache_memcached_port = 11211
> > # Memcached port number. Mondatory if memqcache_method = 'memcached'.
> > # Defaults to 11211.
> > # (change requires restart)
> > memqcache_total_size = 67108864
> > # Total memory size in bytes for storing memory cache.
> > # Mandatory if memqcache_method = 'shmem'.
> > # Defaults to 64MB.
> > # (change requires restart)
> > memqcache_max_num_cache = 1000000
> > # Total number of cache entries. Mandatory
> > # if memqcache_method = 'shmem'.
> > # Each cache entry consumes 48 bytes on shared memory.
> > # Defaults to 1,000,000(45.8MB).
> > # (change requires restart)
> > memqcache_expire = 0
> > # Memory cache entry life time specified in seconds.
> > # 0 means infinite life time. 0 by default.
> > # (change requires restart)
> > memqcache_auto_cache_invalidation = on
> > # If on, invalidation of query cache is triggered by corresponding
> > # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered
> > # by memqcache_expire. on by default.
> > # (change requires restart)
> > memqcache_maxcache = 409600
> > # Maximum SELECT result size in bytes.
> > # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.
> > # (change requires restart)
> > memqcache_cache_block_size = 1048576
> > # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.
> > # Defaults to 1MB.
> > # (change requires restart)
> > memqcache_oiddir = '/var/log/pgpool/oiddir'
> > # Temporary work directory to record table oids
> > # (change requires restart)
> > white_memqcache_table_list = ''
> > # Comma separated list of table names
> to
> > memcache
> > # that don't write to database
> > # Regexp are accepted
> > black_memqcache_table_list = ''
> > # Comma separated list of table names
> > not to memcache
> > # that don't write to database
> > # Regexp are accepted
> > ssl_key = ''
> > ssl_cert = ''
> > ssl_ca_cert = ''
> > ssl_ca_cert_dir = ''
> > log_error_verbosity = 'DEFAULT'
> > client_min_messages = 'debug2'
> > log_min_messages = 'debug2'
> > backend_hostname0 = 'SUYSevPrepDB01'
> > backend_port0 = 5432
> > backend_weight0 = 1
> > backend_data_directory0 = '/var/lib/pgsql/9.4/data'
> > backend_flag0= 'ALLOW_TO_FAILOVER'
> > backend_hostname1 = 'SUYSevPrepDB02'
> > backend_port1 = 5432
> > backend_weight1 = 1
> > backend_data_directory1 = '/var/lib/pgsql/9.4/data'
> > backend_flag1= 'ALLOW_TO_FAILOVER'
> > other_pgpool_hostname0 = 'SUYSevPrepDB02'
> > other_pgpool_port0 = 9999
> > other_wd_port0 = 9000
> > heartbeat_destination0 = 'SUYSevPrepDB02'
> > heartbeat_destination_port0 = 9694
> > heartbeat_device0 = ''
> >
> > # use another authentication method.
> >
> >
> > # TYPE DATABASE USER ADDRESS METHOD
> >
> > # "local" is for Unix domain socket connections only
> > local all all md5
> > # IPv4 local connections:
> > host all all 127.0.0.1/32 md5
> > host all all 0.0.0.0/0 md5
> > # IPv6 local connections:
> > # Allow replication connections from localhost, by a user with the
> > # replication privilege.
> > local replication postgres trust
> > host replication replication 0.0.0.0/0 trust
> > #host replication postgres ::1/128 trust
> > "9.4/data/pg_hba.conf" 93L, 4422C
> >
> >
> > Slave pgpool.conf and pg_hba.conf
> >
> >
> > # ----------------------------
> > # pgPool-II configuration file
> > # ----------------------------
> > #
> > # This file consists of lines of the form:
> > #
> > # name = value
> > #
> > # Whitespace may be used. Comments are introduced with "#" anywhere on a
> > line.
> > # The complete list of parameter names and allowed values can be found in
> > the
> > # pgPool-II documentation.
> > #
> > # This file is read on server startup and when the server receives a
> SIGHUP
> > # signal. If you edit the file on a running system, you have to SIGHUP
> the
> > # server for the changes to take effect, or use "pgpool reload". Some
> > # parameters, which are marked below, require a server shutdown and
> restart
> > to
> > # take effect.
> > #
> >
> >
> >
> #------------------------------------------------------------------------------
> > # CONNECTIONS
> >
> #------------------------------------------------------------------------------
> >
> > # - pgpool Connection Settings -
> >
> > listen_addresses = '*'
> > # Host name or IP address to listen
> on:
> > # '*' for all, '' for no TCP/IP
> > connections
> > # (change requires restart)
> > port = 9999
> > # Port number
> > # (change requires restart)
> > socket_dir = '/tmp'
> > # Unix domain socket path
> > # The Debian package defaults to
> > # /var/run/postgresql
> > # (change requires restart)
> >
> >
> > # - pgpool Communication Manager Connection Settings -
> >
> > pcp_listen_addresses = '*'
> > # Host name or IP address for pcp
> > process to listen on:
> > # '*' for all, '' for no TCP/IP
> > connections
> > # (change requires restart)
> > pcp_port = 9898
> > # Port number for pcp
> > # (change requires restart)
> > pcp_socket_dir = '/tmp'
> > # Unix domain socket path for pcp
> > # The Debian package defaults to
> > # /var/run/postgresql
> > # (change requires restart)
> > listen_backlog_multiplier = 2
> > # Set the backlog parameter of
> listen(2)
> > to
> > # num_init_children * listen_backlog_multiplier.
> > # (change requires restart)
> >
> > # - Backend Connection Settings -
> >
> > # Host name or IP address to connect
> to
> > for backend 0
> > # Port number for backend 0
> > # Weight for backend 0 (only in load
> > balancing mode)
> > # Data directory for backend 0
> > # Controls various backend behavior
> > # ALLOW_TO_FAILOVER or
> > DISALLOW_TO_FAILOVER
> >
> > # - Authentication -
> >
> > enable_pool_hba = on
> > # Use pool_hba.conf for client
> > authentication
> > pool_passwd = 'pool_passwd'
> > # File name of pool_passwd for md5
> > authentication.
> > # "" disables pool_passwd.
> > # (change requires restart)
> > authentication_timeout = 60
> > # Delay in seconds to complete client
> > authentication
> > # 0 means no timeout.
> >
> > # - SSL Connections -
> >
> > ssl = off
> > # Enable SSL support
> > # (change requires restart)
> > #ssl_key = './server.key'
> > # Path to the SSL private key file
> > # (change requires restart)
> > #ssl_cert = './server.cert'
> > # Path to the SSL public certificate
> file
> > # (change requires restart)
> > #ssl_ca_cert = ''
> > # Path to a single PEM format file
> > # containing CA root certificate(s)
> > # (change requires restart)
> > #ssl_ca_cert_dir = ''
> > # Directory containing CA root
> > certificate(s)
> > # (change requires restart)
> >
> >
> >
> #------------------------------------------------------------------------------
> > # POOLS
> >
> #------------------------------------------------------------------------------
> >
> > # - Pool size -
> >
> > num_init_children = 32
> > # Number of pools
> > # (change requires restart)
> > max_pool = 4
> > # Number of connections per pool
> > # (change requires restart)
> >
> > # - Life time -
> >
> > child_life_time = 300
> > # Pool exits after being idle for this
> > many seconds
> > child_max_connections = 0
> > # Pool exits after receiving that many
> > connections
> > # 0 means no exit
> > connection_life_time = 0
> > # Connection to backend closes after
> > being idle for this many seconds
> > # 0 means no close
> > client_idle_limit = 0
> > # Client is disconnected after being
> > idle for that many seconds
> > # (even inside an explicit
> transactions!)
> > # 0 means no disconnection
> >
> >
> >
> #------------------------------------------------------------------------------
> > # LOGS
> >
> #------------------------------------------------------------------------------
> >
> > # - Where to log -
> >
> > log_destination = 'syslog'
> > # Where to log
> > # Valid values are combinations of
> > stderr,
> > # and syslog. Default to stderr.
> >
> > # - What to log -
> >
> > log_line_prefix = '%t: pid %p: # printf-style string to output at
> > beginning of each log line.'
> >
> > log_connections = off
> > # Log connections
> > log_hostname = on
> > # Hostname will be shown in ps status
> > # and in logs if connections are
> logged
> > log_statement = on
> > # Log all statements
> > log_per_node_statement = on
> > # Log all statements
> > # with node and backend informations
> > log_standby_delay = 'if_over_threshold'
> > # Log standby delay
> > # Valid values are combinations of
> > always,
> > # if_over_threshold, none
> >
> > # - Syslog specific -
> >
> > syslog_facility = 'LOCAL0'
> > # Syslog local facility. Default to
> > LOCAL0
> > syslog_ident = 'pgpool'
> > # Syslog program identification string
> > # Default to 'pgpool'
> >
> > # - Debug -
> >
> > debug_level = 2
> > # Debug message verbosity level
> > # 0 means no message, 1 or more mean
> > verbose
> >
> > #log_error_verbosity = default # terse, default, or verbose
> > messages
> >
> > #client_min_messages = notice # values in order of decreasing
> > detail:
> > # debug5
> > # debug4
> > # debug3
> > # debug2
> > # debug1
> > # log
> > # notice
> > # warning
> > # error
> >
> > #log_min_messages = warning # values in order of decreasing
> > detail:
> > # debug5
> > # debug4
> > # debug3
> > # debug2
> > # debug1
> > # info
> > # notice
> > # warning
> > # error
> > # log
> > # fatal
> > # panic
> >
> >
> #------------------------------------------------------------------------------
> > # FILE LOCATIONS
> >
> #------------------------------------------------------------------------------
> >
> > pid_file_name = '/var/run/pgpool/pgpool.pid'
> > # PID file name
> > # (change requires restart)
> > logdir = '/tmp'
> > # Directory of pgPool status file
> > # (change requires restart)
> >
> >
> >
> #------------------------------------------------------------------------------
> > # CONNECTION POOLING
> >
> #------------------------------------------------------------------------------
> >
> > connection_cache = on
> > # Activate connection pools
> > # (change requires restart)
> >
> > # Semicolon separated list of queries
> > # to be issued at the end of a session
> > # The default is for 8.3 and later
> > reset_query_list = 'ABORT; DISCARD ALL'
> > # The following one is for 8.2 and
> before
> > #reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
> >
> >
> >
> #------------------------------------------------------------------------------
> > # REPLICATION MODE
> >
> #------------------------------------------------------------------------------
> >
> > replication_mode = off
> > # Activate replication mode
> > # (change requires restart)
> > replicate_select = off
> > # Replicate SELECT statements
> > # when in replication mode
> > # replicate_select is higher priority
> > than
> > # load_balance_mode.
> >
> > insert_lock = off
> > # Automatically locks a dummy row or a
> > table
> > # with INSERT statements to keep
> SERIAL
> > data
> > # consistency
> > # Without SERIAL, no lock will be
> issued
> > lobj_lock_table = ''
> > # When rewriting lo_creat command in
> > # replication mode, specify table
> name to
> > # lock
> >
> > # - Degenerate handling -
> >
> > replication_stop_on_mismatch = off
> > # On disagreement with the packet kind
> > # sent from backend, degenerate the
> node
> > # which is most likely "minority"
> > # If off, just force to exit this
> session
> >
> > failover_if_affected_tuples_mismatch = off
> > # On disagreement with the number of
> > affected
> > # tuples in UPDATE/DELETE queries,
> then
> > # degenerate the node which is most
> > likely
> > # "minority".
> > # If off, just abort the transaction
> to
> > # keep the consistency
> >
> >
> >
> #------------------------------------------------------------------------------
> > # LOAD BALANCING MODE
> >
> #------------------------------------------------------------------------------
> >
> > load_balance_mode = on
> > # Activate load balancing mode
> > # (change requires restart)
> > ignore_leading_white_space = on
> > # Ignore leading white spaces of each
> > query
> > white_function_list = ''
> > # Comma separated list of function
> names
> > # that don't write to database
> > # Regexp are accepted
> > black_function_list = 'currval,lastval,nextval,setval'
> > # Comma separated list of function
> names
> > # that write to database
> > # Regexp are accepted
> >
> > database_redirect_preference_list = ''
> > # comma separated list of pairs of database and node id.
> > # example: postgres:primary,mydb[0-4]:1,mydb[5-9]:2'
> > # valid for streaming replicaton mode only.
> >
> > app_name_redirect_preference_list = ''
> > # comma separated list of pairs of app name and node id.
> > # example: 'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'
> > # valid for streaming replicaton mode only.
> > allow_sql_comments = off
> > # if on, ignore SQL comments when judging if load balance or
> > # query cache is possible.
> > # If off, SQL comments effectively prevent the judgment
> > # (pre 3.4 behavior).
> >
> >
> #------------------------------------------------------------------------------
> > # MASTER/SLAVE MODE
> >
> #------------------------------------------------------------------------------
> >
> > master_slave_mode = on
> > # Activate master/slave mode
> > # (change requires restart)
> > master_slave_sub_mode = 'stream'
> > # Master/slave sub mode
> > # Valid values are combinations slony
> or
> > # stream. Default is slony.
> > # (change requires restart)
> >
> > # - Streaming -
> >
> > sr_check_period = 0
> > # Streaming replication check period
> > # Disabled (0) by default
> > sr_check_user = 'postgres'
> > # Streaming replication check user
> > # This is neccessary even if you
> disable
> > streaming
> > # replication delay check by
> > sr_check_period = 0
> > sr_check_password = 'xxx'
> > # Password for streaming replication
> > check user
> > delay_threshold = 0
> > # Threshold before not dispatching
> query
> > to standby node
> > # Unit is in bytes
> > # Disabled (0) by default
> >
> > # - Special commands -
> >
> > follow_master_command = ''
> > # Executes this command after master
> > failover
> > # Special values:
> > # %d = node id
> > # %h = host name
> > # %p = port number
> > # %D = database cluster path
> > # %m = new master node id
> > # %H = hostname of the new master
> node
> > # %M = old master node id
> > # %P = old primary node id
> > # %r = new master port number
> > # %R = new master database cluster path
> > # %% = '%' character
> >
> >
> #------------------------------------------------------------------------------
> > # HEALTH CHECK
> >
> #------------------------------------------------------------------------------
> >
> > health_check_period = 5
> > # Health check period
> > # Disabled (0) by default
> > health_check_timeout = 0
> > # Health check timeout
> > # 0 means no timeout
> > health_check_user = 'postgres'
> > # Health check user
> > health_check_password = 'xxx'
> > # Password for health check user
> > health_check_max_retries = 0
> > # Maximum number of times to retry a
> > failed health check before giving up.
> > health_check_retry_delay = 1
> > # Amount of time to wait (in seconds)
> > between retries.
> > connect_timeout = 10000
> > # Timeout value in milliseconds before
> > giving up to connect to backend.
> > # Default is 10000 ms (10 second). Flaky network user may want to
> increase
> > # the value. 0 means no timeout.
> > # Note that this value is not only used for health check,
> > # but also for ordinary conection to backend.
> >
> >
> #------------------------------------------------------------------------------
> > # FAILOVER AND FAILBACK
> >
> #------------------------------------------------------------------------------
> >
> > failover_command = '/usr/local/etc/failover.sh %d %H
> > /var/log/pgpool/trigger/trigger_file0'
> > # Executes this command at failover
> > # Special values:
> > # %d = node id
> > # %h = host name
> > # %p = port number
> > # %D = database cluster path
> > # %m = new master node id
> > # %H = hostname of the new master
> node
> > # %M = old master node id
> > # %P = old primary node id
> > # %r = new master port number
> > # %R = new master database cluster path
> > # %% = '%' character
> > failback_command = ''
> > # Executes this command at failback.
> > # Special values:
> > # %d = node id
> > # %h = host name
> > # %p = port number
> > # %D = database cluster path
> > # %m = new master node id
> > # %H = hostname of the new master
> node
> > # %M = old master node id
> > # %P = old primary node id
> > # %r = new master port number
> > # %R = new master database cluster path
> > # %% = '%' character
> >
> > fail_over_on_backend_error = on
> > # Initiates failover when
> > reading/writing to the
> > # backend communication socket fails
> > # If set to off, pgpool will report an
> > # error and disconnect the session.
> >
> > search_primary_node_timeout = 10
> > # Timeout in seconds to search for the
> > # primary node when a failover occurs.
> > # 0 means no timeout, keep searching
> > # for a primary node forever.
> >
> >
> #------------------------------------------------------------------------------
> > # ONLINE RECOVERY
> >
> #------------------------------------------------------------------------------
> >
> > recovery_user = 'postgres'
> > # Online recovery user
> > recovery_password = 'xxx'
> > # Online recovery password
> > recovery_1st_stage_command = 'recovery_1st_stage'
> > # Executes a command in first stage
> > recovery_2nd_stage_command = ''
> > # Executes a command in second stage
> > recovery_timeout = 90
> > # Timeout in seconds to wait for the
> > # recovering node's postmaster to
> start
> > up
> > # 0 means no wait
> > client_idle_limit_in_recovery = 0
> > # Client is disconnected after being
> idle
> > # for that many seconds in the second
> > stage
> > # of online recovery
> > # 0 means no disconnection
> > # -1 means immediate disconnection
> >
> >
> >
> #------------------------------------------------------------------------------
> > # WATCHDOG
> >
> #------------------------------------------------------------------------------
> >
> > # - Enabling -
> >
> > use_watchdog = on
> > # Activates watchdog
> > # (change requires restart)
> >
> > # -Connection to up stream servers -
> >
> > trusted_servers = ''
> > # trusted server list which are used
> > # to confirm network connection
> > # (hostA,hostB,hostC,...)
> > # (change requires restart)
> > ping_path = '/bin'
> > # ping command path
> > # (change requires restart)
> >
> > # - Watchdog communication Settings -
> >
> > wd_hostname = 'SUYSevPrepDB02'
> > # Host name or IP address of this
> > watchdog
> > # (change requires restart)
> > wd_port = 9000
> > # port number for watchdog service
> > # (change requires restart)
> > wd_authkey = ''
> > # Authentication key for watchdog
> > communication
> > # (change requires restart)
> >
> > # - Virtual IP control Setting -
> >
> > delegate_IP = '192.168.140.112'
> > # delegate IP address
> > # If this is empty, virtual IP never
> > bring up.
> > # (change requires restart)
> > ifconfig_path = '/apachebin'
> > # ifconfig command path
> > # (change requires restart)
> > if_up_cmd = 'ifconfig eth1:0 inet $_IP_$ netmask 255.255.255.0'
> > # startup delegate IP command
> > # (change requires restart)
> > if_down_cmd = 'ifconfig eth1:0 down'
> > # shutdown delegate IP command
> > # (change requires restart)
> >
> > arping_path = '/apachebin'
> > # (change requires restart)
> >
> > arping_cmd = 'arping -I eth0 -U $_IP_$ -w 1'
> > # arping command
> > # (change requires restart)
> >
> > # - Behaivor on escalation Setting -
> >
> > clear_memqcache_on_escalation = on
> > # Clear all the query cache on shared
> > memory
> > # when standby pgpool escalate to
> > active pgpool
> > # (= virtual IP holder).
> > # This should be off if client
> connects
> > to pgpool
> > # not using virtual IP.
> > # (change requires restart)
> > wd_escalation_command = ''
> > # Executes this command at escalation
> > on new active pgpool.
> > # (change requires restart)
> >
> > # - Lifecheck Setting -
> >
> > # -- common --
> >
> > wd_lifecheck_method = 'heartbeat'
> > # Method of watchdog lifecheck
> > ('heartbeat' or 'query')
> > # (change requires restart)
> > wd_interval = 3
> > # lifecheck interval (sec) > 0
> > # (change requires restart)
> >
> > # -- heartbeat mode --
> >
> > wd_heartbeat_port = 9694
> > # Port number for receiving heartbeat
> > signal
> > # (change requires restart)
> > wd_heartbeat_keepalive = 2
> > # Interval time of sending heartbeat
> > signal (sec)
> > # (change requires restart)
> > wd_heartbeat_deadtime = 30
> > # Deadtime interval for heartbeat
> > signal (sec)
> > # (change requires restart)
> > # Host name or IP address of
> > destination 0
> > # for sending heartbeat signal.
> > # (change requires restart)
> > # Port number of destination 0 for
> > sending
> > # heartbeat signal. Usually this is
> the
> > # same as wd_heartbeat_port.
> > # (change requires restart)
> > # Name of NIC device (such like
> 'eth0')
> > # used for sending/receiving
> heartbeat
> > # signal to/from destination 0.
> > # This works only when this is not
> empty
> > # and pgpool has root privilege.
> > # (change requires restart)
> >
> > #heartbeat_destination1 = 'host0_ip2'
> > #heartbeat_destination_port1 = 9694
> > #heartbeat_device1 = ''
> >
> > # -- query mode --
> >
> > wd_life_point = 3
> > # lifecheck retry times
> > # (change requires restart)
> > wd_lifecheck_query = 'SELECT 1'
> > # lifecheck query to pgpool from
> > watchdog
> > # (change requires restart)
> > wd_lifecheck_dbname = 'template1'
> > # Database name connected for
> lifecheck
> > # (change requires restart)
> > wd_lifecheck_user = ''
> > # watchdog user monitoring pgpools in
> > lifecheck
> > # (change requires restart)
> > wd_lifecheck_password = ''
> > # Password for watchdog user in
> > lifecheck
> > # (change requires restart)
> >
> > # - Other pgpool Connection Settings -
> >
> > # Host name or IP address to connect
> to
> > for other pgpool 0
> > # (change requires restart)
> > # Port number for othet pgpool 0
> > # (change requires restart)
> > # Port number for othet watchdog 0
> > # (change requires restart)
> > #other_pgpool_hostname1 = 'host1'
> > #other_pgpool_port1 = 5432
> > #other_wd_port1 = 9000
> >
> >
> >
> #------------------------------------------------------------------------------
> > # OTHERS
> >
> #------------------------------------------------------------------------------
> > relcache_expire = 0
> > # Life time of relation cache in
> seconds.
> > # 0 means no cache expiration(the
> > default).
> > # The relation cache is used for cache
> > the
> > # query result against PostgreSQL
> system
> > # catalog to obtain various
> information
> > # including table structures or if
> it's a
> > # temporary table or not. The cache is
> > # maintained in a pgpool child local
> > memory
> > # and being kept as long as it
> survives.
> > # If someone modify the table by using
> > # ALTER TABLE or some such, the
> relcache
> > is
> > # not consistent anymore.
> > # For this purpose, cache_expiration
> > # controls the life time of the cache.
> > relcache_size = 256
> > # Number of relation cache
> > # entry. If you see frequently:
> > # "pool_search_relcache: cache replacement happend"
> > # in the pgpool log, you might want to increate this number.
> >
> > check_temp_table = on
> > # If on, enable temporary table check
> in
> > SELECT statements.
> > # This initiates queries against
> system
> > catalog of primary/master
> > # thus increases load of master.
> > # If you are absolutely sure that your system never uses temporary
> tables
> > # and you want to save access to primary/master, you could turn this
> off.
> > # Default is on.
> >
> > check_unlogged_table = off
> > # If on, enable unlogged table check
> in
> > SELECT statements.
> > # This initiates queries against
> system
> > catalog of primary/master
> > # thus increases load of master.
> > # If you are absolutely sure that your
> > system never uses unlogged tables
> > # and you want to save access to
> > primary/master, you could turn this off.
> > # Default is on.
> >
> >
> #------------------------------------------------------------------------------
> > # IN MEMORY QUERY MEMORY CACHE
> >
> #------------------------------------------------------------------------------
> > memory_cache_enabled = off
> > # If on, use the memory cache functionality, off by default
> > memqcache_method = 'shmem'
> > # Cache storage method. either 'shmem'(shared memory) or
> > # 'memcached'. 'shmem' by default
> > # (change requires restart)
> > memqcache_memcached_host = 'localhost'
> > # Memcached host name or IP address. Mandatory if
> > # memqcache_method = 'memcached'.
> > # Defaults to localhost.
> > # (change requires restart)
> > memqcache_memcached_port = 11211
> > # Memcached port number. Mondatory if memqcache_method = 'memcached'.
> > # Defaults to 11211.
> > # (change requires restart)
> > memqcache_total_size = 67108864
> > # Total memory size in bytes for storing memory cache.
> > # Mandatory if memqcache_method = 'shmem'.
> > # Defaults to 64MB.
> > # (change requires restart)
> > memqcache_max_num_cache = 1000000
> > # Total number of cache entries. Mandatory
> > # if memqcache_method = 'shmem'.
> > # Each cache entry consumes 48 bytes on shared memory.
> > # Defaults to 1,000,000(45.8MB).
> > # (change requires restart)
> > memqcache_expire = 0
> > # Memory cache entry life time specified in seconds.
> > # 0 means infinite life time. 0 by default.
> > # (change requires restart)
> > memqcache_auto_cache_invalidation = on
> > # If on, invalidation of query cache is triggered by corresponding
> > # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered
> > # by memqcache_expire. on by default.
> > # (change requires restart)
> > memqcache_maxcache = 409600
> > # Maximum SELECT result size in bytes.
> > # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.
> > # (change requires restart)
> > memqcache_cache_block_size = 1048576
> > # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.
> > # Defaults to 1MB.
> > # (change requires restart)
> > memqcache_oiddir = '/var/log/pgpool/oiddir'
> > # Temporary work directory to record table oids
> > # (change requires restart)
> > white_memqcache_table_list = ''
> > # Comma separated list of table names
> to
> > memcache
> > # that don't write to database
> > # Regexp are accepted
> > black_memqcache_table_list = ''
> > # Comma separated list of table names
> > not to memcache
> > # that don't write to database
> > # Regexp are accepted
> > ssl_key = ''
> > ssl_cert = ''
> > ssl_ca_cert = ''
> > ssl_ca_cert_dir = ''
> > log_error_verbosity = 'DEFAULT'
> > client_min_messages = 'notice'
> > log_min_messages = 'warning'
> > backend_hostname0 = 'SUYSevPrepDB01'
> > backend_port0 = 5432
> > backend_weight0 = 1
> > backend_data_directory0 = '/var/lib/pgsql/9.4/data'
> > backend_flag0= 'ALLOW_TO_FAILOVER'
> > backend_hostname1 = 'SUYSevPrepDB02'
> > backend_port1 = 5432
> > backend_weight1 = 1
> > backend_data_directory1 = '/var/lib/pgsql/9.4/data'
> > backend_flag1= 'ALLOW_TO_FAILOVER'
> > other_pgpool_hostname0 = 'SUYSevPrepDB01'
> > other_pgpool_port0 = 9999
> > other_wd_port0 = 9000
> > heartbeat_destination0 = 'SUYSevPrepDB01'
> > heartbeat_destination_port0 = 9694
> > heartbeat_device0 = ''
> >
> > # TYPE DATABASE USER ADDRESS METHOD
> >
> > # "local" is for Unix domain socket connections only
> > local all all md5
> > # IPv4 local connections:
> > host all all 127.0.0.1/32 md5
> > host all all 0.0.0.0/0 md5
> > # IPv6 local connections:
> > # Allow replication connections from localhost, by a user with the
> > # replication privilege.
> > local replication postgres trust
> > host replication replication 0.0.0.0/0 trust
> > #host replication postgres ::1/128 trust
> >
> >
> > 2016-04-07 19:31 GMT-03:00 Tatsuo Ishii <ishii at postgresql.org>:
> >
> >> >>> *DETALLE: message length (12) in slot 1 does not match with slot
> 0(8)*
> >>
> >> Probably a configuration mismatch in PostgreSQL server #0 and
> >> PostgreSQL server #1. From reading the message above, server #0 asks
> >> trust authentication (no password), while server #1 requires certain
> >> authentication (possibly md5). Showing full pgpool.conf and
> >> pg_hba.conf from both PostgreSQL servers will reveal this.
> >>
> >> Best regards,
> >> --
> >> Tatsuo Ishii
> >> SRA OSS, Inc. Japan
> >> English: http://www.sraoss.co.jp/index_en.php
> >> Japanese:http://www.sraoss.co.jp
> >>
> >> > Lucas is the same error!!!!
> >> >
> >> >
> >> > Apr 7 16:14:24 localhost pgpool[14839]: [40-1] 2016-04-07 16:14:24:
> pid
> >> > 14839: # printf-style string to output at beginning of each log
> >> line.ERROR:
> >> > unable to read message length
> >> > Apr 7 16:14:24 localhost pgpool[14839]: [40-2] 2016-04-07 16:14:24:
> pid
> >> > 14839: # printf-style string to output at beginning of each log
> >> > line.DETAIL: message length (12) in slot 1 does not match with slot 0
> >> >
> >> > 2016-04-07 15:52 GMT-03:00 Lucas Luengas <lucasluengas at gmail.com>:
> >> >
> >> >> Hello
> >> >> You can check pgpool log and postgresql log when you run that psql
> >> command.
> >> >> Regards.
> >> >> On Apr 6, 2016 8:30 PM, "Daniel Gallo" <danielito.gallo at gmail.com>
> >> wrote:
> >> >>
> >> >>> Dear I'm trying to run the following and I get the following error
> and
> >> I
> >> >>> can not figure out what the problem is , I could help ?
> >> >>>
> >> >>>
> >> >>> Any information that need be notified me and sent them
> >> >>>
> >> >>>
> >> >>>
> >> >>> Thanks a lots!!!!!
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>> -bash-4.2$ psql -h localhost -U postgres -p 5432
> >> >>>
> >> >>> psql (9.4.4)
> >> >>>
> >> >>> Digite «help» para obtener ayuda.
> >> >>>
> >> >>>
> >> >>>
> >> >>> postgres=#
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>> *-bash-4.2$ psql -h localhost -U postgres -p 9999*
> >> >>>
> >> >>> *psql: ERROR: unable to read message length*
> >> >>>
> >> >>> *DETALLE: message length (12) in slot 1 does not match with slot
> 0(8)*
> >> >>>
> >> >>>
> >> >>>
> >> >>> Any idea?
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>> *pg_hba.conf*
> >> >>>
> >> >>>
> >> >>>
> >> >>> # TYPE DATABASE USER ADDRESS
> METHOD
> >> >>>
> >> >>>
> >> >>>
> >> >>> # "local" is for Unix domain socket connections only
> >> >>>
> >> >>> local all all md5
> >> >>>
> >> >>> # IPv4 local connections:
> >> >>>
> >> >>> host all all 127.0.0.1/32 md5
> >> >>>
> >> >>> host all all 0.0.0.0/0 md5
> >> >>>
> >> >>> # IPv6 local connections:
> >> >>>
> >> >>> # Allow replication connections from localhost, by a user with the
> >> >>>
> >> >>> # replication privilege.
> >> >>>
> >> >>> local replication postgres
> trust
> >> >>>
> >> >>> host replication replication 0.0.0.0/0
> trust
> >> >>>
> >> >>> #host replication postgres ::1/128
> trust
> >> >>>
> >> >>>
> >> >>>
> >> >>> -rwxrw-r--. 1 apache apache 33283 abr 1 15:49 pgpool.conf
> >> >>>
> >> >>>
> >> >>>
> >> >>> *pgpool.conf*
> >> >>>
> >> >>>
> >> >>>
> >> >>> # - Authentication -
> >> >>>
> >> >>>
> >> >>>
> >> >>> enable_pool_hba = on
> >> >>>
> >> >>> # Use pool_hba.conf for client
> >> >>> authentication
> >> >>>
> >> >>> pool_passwd = 'pool_passwd'
> >> >>>
> >> >>> # File name of pool_passwd for
> md5
> >> >>> authentication.
> >> >>>
> >> >>> # "" disables pool_passwd.
> >> >>>
> >> >>> # (change requires restart)
> >> >>>
> >> >>> authentication_timeout = 60
> >> >>>
> >> >>> # Delay in seconds to complete
> >> client
> >> >>> authentication
> >> >>>
> >> >>> # 0 means no timeout.
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>> -rw-r--r--. 1 apache root 42 feb 29 18:28 pool_passwd
> >> >>>
> >> >>>
> >> >>>
> >> >>> postgres:5c0435eee0f211f150e980e459151xxx
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>> -rwxrw-r--. 1 root root 3295 mar 3 18:19 pool_hba.conf
> >> >>>
> >> >>>
> >> >>>
> >> >>> # TYPE DATABASE USER CIDR-ADDRESS METHOD
> >> >>>
> >> >>>
> >> >>>
> >> >>> # "local" is for Unix domain socket connections only
> >> >>>
> >> >>> local all all md5
> >> >>>
> >> >>> # IPv4 local connections:
> >> >>>
> >> >>> host all all 127.0.0.1/32 md5
> >> >>>
> >> >>> host all all 0.0.0.0/0 md5
> >> >>>
> >> >>> #host all all ::1/128 trust
> >> >>>
> >> >>> _______________________________________________
> >> >>> pgpool-general mailing list
> >> >>> pgpool-general at pgpool.net
> >> >>> http://www.pgpool.net/mailman/listinfo/pgpool-general
> >> >>>
> >> >>>
> >>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pgpool.net/pipermail/pgpool-general/attachments/20160408/5508bc3e/attachment.htm>
More information about the pgpool-general
mailing list