[pgpool-general: 4093] issue with single node failover
Travis Kirstine
tkirstine at firstbasesolutions.com
Tue Oct 6 22:50:27 JST 2015
I have pgpool 3.4.3 (from the pgdb93 repo) setup in raw mode pointing to a
single backend node on a separate server. I would like set pgpool to
failover to the single node and attempt to reconnect indefinitely. For
some reason I can't get the config right or it may be a bug? I have it
working in a different environment using pgpool 3.2 from the epel repo
Any help would be greatly appreciated.
# Log
2015-10-06 09:45:49: pid 13371: DETAIL: postmaster on DB node 0 was
shutdown by administrative command
2015-10-06 09:45:49: pid 13371: LOG: received degenerate backend request
for node_id: 0 from pid [13371]
2015-10-06 09:45:49: pid 13361: LOG: starting degeneration. shutdown host
172.16.0.59(5432)
2015-10-06 09:45:49: pid 13361: LOG: failover: no valid backends node found
2015-10-06 09:45:49: pid 13361: LOG: Restart all children
2015-10-06 09:45:49: pid 13361: LOG: failover: set new primary node: -1
2015-10-06 09:45:49: pid 13374: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13370: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13376: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13367: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13363: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13373: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13372: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13365: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13364: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13377: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13366: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13375: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13368: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13369: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13371: LOG: child process received shutdown
request signal 3
2015-10-06 09:45:49: pid 13379: LOG: worker process received restart
request
failover done. shutdown host 172.16.0.59(5432)2015-10-06 09:45:49: pid
13361: LOG: failover done. shutdown host 172.16.0.59(5432)
2015-10-06 09:45:50: pid 13378: LOG: restart request received in pcp child
process
2015-10-06 09:45:50: pid 13361: LOG: PCP child 13378 exits with status 256
in failover()
2015-10-06 09:45:50: pid 13361: LOG: fork a new PCP child pid 13399 in
failover()
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13363 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13363 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13364 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13364 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13365 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13365 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13366 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13366 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13367 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13367 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13368 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13368 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13369 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13369 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13370 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13370 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13371 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13371 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13372 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13372 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13373 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13373 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13374 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13374 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13375 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13375 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13376 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13376 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13377 exits
with status 0
2015-10-06 09:45:50: pid 13361: LOG: child process with pid: 13377 exited
with success and will not be restarted
2015-10-06 09:45:50: pid 13361: LOG: worker child process with pid: 13379
exits with status 256
2015-10-06 09:45:50: pid 13361: LOG: fork a new worker child process with
pid: 13400
2015-10-06 09:46:02: pid 13392: FATAL: pgpool is not accepting any new
connections
2015-10-06 09:46:02: pid 13392: DETAIL: all backend nodes are down, pgpool
requires atleast one valid node
2015-10-06 09:46:02: pid 13392: HINT: repair the backend nodes and restart
pgpool
2015-10-06 09:46:02: pid 13361: LOG: child process with pid: 13392 exits
with status 256
2015-10-06 09:46:02: pid 13361: LOG: fork a new child process with pid:
13401
2015-10-06 09:46:27: pid 13401: FATAL: pgpool is not accepting any new
connections
2015-10-06 09:46:27: pid 13401: DETAIL: all backend nodes are down, pgpool
requires atleast one valid node
2015-10-06 09:46:27: pid 13401: HINT: repair the backend nodes and restart
pgpool
2015-10-06 09:46:27: pid 13361: LOG: child process with pid: 13401 exits
with status 256
2015-10-06 09:46:27: pid 13361: LOG: fork a new child process with pid:
13410
2015-10-06 09:46:34: pid 13390: FATAL: pgpool is not accepting any new
connections
2015-10-06 09:46:34: pid 13390: DETAIL: all backend nodes are down, pgpool
requires atleast one valid node
2015-10-06 09:46:34: pid 13390: HINT: repair the backend nodes and restart
pgpool
2015-10-06 09:46:34: pid 13361: LOG: child process with pid: 13390 exits
with status 256
2015-10-06 09:46:34: pid 13361: LOG: fork a new child process with pid:
13412
# Config File
#------------------------------------------------------------------------------
# CONNECTIONS
#------------------------------------------------------------------------------
# - pgpool Connection Settings -
listen_addresses = '*'
# Host name or IP address to listen on:
# '*' for all, '' for no TCP/IP
connections
# (change requires restart)
port = 9999
# Port number
# (change requires restart)
socket_dir = '/var/run/pgpool-II-93'
# Unix domain socket path
# (change requires restart)
# - pgpool Communication Manager Connection Settings -
pcp_port = 9898
# Port number for pcp
# (change requires restart)
pcp_socket_dir = '/var/run/pgpool-II-93'
# Unix domain socket path for pcp
# (change requires restart)
# - Backend Connection Settings -
backend_hostname0 = '172.16.0.59'
# Host name or IP address to connect to
for backend 0
backend_port0 = 5432
# Port number for backend 0
# backend_weight0 = 1
# Weight for backend 0 (only in load
balancing mode)
# backend_data_directory0 = '/var/lib/pgsql/9.3/data'
# Data directory for backend 0
backend_flag0 = 'ALLOW_TO_FAILOVER'
# Controls various backend behavior
# ALLOW_TO_FAILOVER or
DISALLOW_TO_FAILOVER
#backend_hostname1 = 'host2'
#backend_port1 = 5433
#backend_weight1 = 1
#backend_data_directory1 = '/data1'
#backend_flag1 = 'ALLOW_TO_FAILOVER'
# - Authentication -
enable_pool_hba = off
# Use pool_hba.conf for client
authentication
pool_passwd = 'pool_passwd'
# File name of pool_passwd for md5
authentication.
# "" disables pool_passwd.
# (change requires restart)
authentication_timeout = 60
# Delay in seconds to complete client
authentication
# 0 means no timeout.
# - SSL Connections -
ssl = off
# Enable SSL support
# (change requires restart)
#ssl_key = './server.key'
# Path to the SSL private key file
# (change requires restart)
#ssl_cert = './server.cert'
# Path to the SSL public certificate file
# (change requires restart)
#ssl_ca_cert = ''
# Path to a single PEM format file
# containing CA root certificate(s)
# (change requires restart)
#ssl_ca_cert_dir = ''
# Directory containing CA root
certificate(s)
# (change requires restart)
#------------------------------------------------------------------------------
# POOLS
#------------------------------------------------------------------------------
# - Pool size -
num_init_children = 15
# Number of pools
# (change requires restart)
max_pool = 1
# Number of connections per pool
# (change requires restart)
# - Life time -
child_life_time = 120 # was 300
# Pool exits after being idle for this
many seconds
child_max_connections = 0
# Pool exits after receiving that many
connections
# 0 means no exit
connection_life_time = 0 # was 0
# Connection to backend closes after
being idle for this many seconds
# 0 means no close
client_idle_limit = 0 # was 0
# Client is disconnected after being
idle for that many seconds
# (even inside an explicit transactions!)
# 0 means no disconnection
#------------------------------------------------------------------------------
# LOGS
#------------------------------------------------------------------------------
# - Where to log -
log_destination = 'stderr'
# Where to log
# Valid values are combinations of
stderr,
# and syslog. Default to stderr.
# - What to log -
print_timestamp = on
# Print timestamp on each line
# (change requires restart)
log_connections = on
# Log connections
log_hostname = off
# Hostname will be shown in ps status
# and in logs if connections are logged
log_statement = off
# Log all statements
log_per_node_statement = off
# Log all statements
# with node and backend informations
log_standby_delay = 'none'
# Log standby delay
# Valid values are combinations of
always,
# if_over_threshold, none
# - Syslog specific -
syslog_facility = 'LOCAL0'
# Syslog local facility. Default to
LOCAL0
syslog_ident = 'pgpool'
# Syslog program identification string
# Default to 'pgpool'
# - Debug -
debug_level = 2
# Debug message verbosity level
# 0 means no message, 1 or more mean
verbose
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
pid_file_name = '/var/run/pgpool-II-93/pgpool.pid'
# PID file name
# (change requires restart)
logdir = '/var/log/pgpool-II'
# Directory of pgPool status file
# (change requires restart)
#------------------------------------------------------------------------------
# CONNECTION POOLING
#------------------------------------------------------------------------------
#connection_cache = off
connection_cache = on
# Activate connection pools
# (change requires restart)
# Semicolon separated list of queries
# to be issued at the end of a session
# The default is for 8.3 and later
reset_query_list = 'ABORT; DISCARD ALL'
# The following one is for 8.2 and before
#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
#------------------------------------------------------------------------------
# REPLICATION MODE
#------------------------------------------------------------------------------
replication_mode = off
# Activate replication mode
# (change requires restart)
replicate_select = off
# Replicate SELECT statements
# when in replication or parallel mode
# replicate_select is higher priority
than
# load_balance_mode.
insert_lock = on
# Automatically locks a dummy row or a
table
# with INSERT statements to keep SERIAL
data
# consistency
# Without SERIAL, no lock will be issued
lobj_lock_table = ''
# When rewriting lo_creat command in
# replication mode, specify table name to
# lock
# - Degenerate handling -
replication_stop_on_mismatch = off
# On disagreement with the packet kind
# sent from backend, degenerate the node
# which is most likely "minority"
# If off, just force to exit this session
failover_if_affected_tuples_mismatch = off
# On disagreement with the number of
affected
# tuples in UPDATE/DELETE queries, then
# degenerate the node which is most
likely
# "minority".
# If off, just abort the transaction to
# keep the consistency
#------------------------------------------------------------------------------
# LOAD BALANCING MODE
#------------------------------------------------------------------------------
load_balance_mode = off
# Activate load balancing mode
# (change requires restart)
ignore_leading_white_space = on
# Ignore leading white spaces of each
query
white_function_list = ''
# Comma separated list of function names
# that don't write to database
# Regexp are accepted
black_function_list = 'nextval,setval'
# Comma separated list of function names
# that write to database
# Regexp are accepted
#------------------------------------------------------------------------------
# MASTER/SLAVE MODE
#------------------------------------------------------------------------------
master_slave_mode = off
# Activate master/slave mode
# (change requires restart)
master_slave_sub_mode = 'slony'
# Master/slave sub mode
# Valid values are combinations slony or
# stream. Default is slony.
# (change requires restart)
# - Streaming -
sr_check_period = 0
# Streaming replication check period
# Disabled (0) by default
sr_check_user = 'webserver'
# Streaming replication check user
# This is necessary even if you disable
# streaming replication delay check with
# sr_check_period = 0
sr_check_password = ''
# Password for streaming replication
check user
delay_threshold = 0
# Threshold before not dispatching query
to standby node
# Unit is in bytes
# Disabled (0) by default
# - Special commands -
follow_master_command = ''
# Executes this command after master
failover
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %r = new master port number
# %R = new master database cluster path
# %% = '%' character
#------------------------------------------------------------------------------
# PARALLEL MODE
#------------------------------------------------------------------------------
parallel_mode = off
# Activates parallel query mode
# (change requires restart)
pgpool2_hostname = ''
# Set pgpool2 hostname
# (change requires restart)
# - System DB info -
system_db_hostname = 'localhost'
# (change requires restart)
system_db_port = 5432
# (change requires restart)
system_db_dbname = 'pgpool'
# (change requires restart)
system_db_schema = 'pgpool_catalog'
# (change requires restart)
system_db_user = 'pgpool'
# (change requires restart)
system_db_password = ''
# (change requires restart)
#------------------------------------------------------------------------------
# HEALTH CHECK
#------------------------------------------------------------------------------
health_check_period = 10
# Health check period
# Disabled (0) by default
health_check_timeout = 10
# Health check timeout
# 0 means no timeout
health_check_user = 'webserver'
# Health check user
health_check_password = ''
# Password for health check user
health_check_max_retries = 30
# Maximum number of times to retry a
failed health check before giving up.
health_check_retry_delay = 1
# Amount of time to wait (in seconds)
between retries.
#------------------------------------------------------------------------------
# FAILOVER AND FAILBACK
#------------------------------------------------------------------------------
failover_command = ''
# Executes this command at failover
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %r = new master port number
# %R = new master database cluster path
# %% = '%' character
failback_command = ''
# Executes this command at failback.
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %r = new master port number
# %R = new master database cluster path
# %% = '%' character
fail_over_on_backend_error = on
# Initiates failover when
reading/writing to the
# backend communication socket fails
# If set to off, pgpool will report an
# error and disconnect the session.
search_primary_node_timeout = 0
# Timeout in seconds to search for the
# primary node when a failover occurs.
# 0 means no timeout, keep searching
# for a primary node forever.
#------------------------------------------------------------------------------
# ONLINE RECOVERY
#------------------------------------------------------------------------------
recovery_user = 'webserver'
# Online recovery user
recovery_password = ''
# Online recovery password
recovery_1st_stage_command = ''
# Executes a command in first stage
recovery_2nd_stage_command = ''
# Executes a command in second stage
recovery_timeout = 90
# Timeout in seconds to wait for the
# recovering node's postmaster to start
up
# 0 means no wait
client_idle_limit_in_recovery = 0
# Client is disconnected after being idle
# for that many seconds in the second
stage
# of online recovery
# 0 means no disconnection
# -1 means immediate disconnection
#------------------------------------------------------------------------------
# WATCHDOG
#------------------------------------------------------------------------------
# - Enabling -
use_watchdog = off
# Activates watchdog
# (change requires restart)
# -Connection to up stream servers -
trusted_servers = ''
# trusted server list which are used
# to confirm network connection
# (hostA,hostB,hostC,...)
# (change requires restart)
ping_path = '/bin'
# ping command path
# (change requires restart)
# - Watchdog communication Settings -
wd_hostname = ''
# Host name or IP address of this
watchdog
# (change requires restart)
wd_port = 9000
# port number for watchdog service
# (change requires restart)
wd_authkey = ''
# Authentication key for watchdog
communication
# (change requires restart)
# - Virtual IP control Setting -
delegate_IP = ''
# delegate IP address
# If this is empty, virtual IP never
bring up.
# (change requires restart)
ifconfig_path = '/sbin'
# ifconfig command path
# (change requires restart)
if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0'
# startup delegate IP command
# (change requires restart)
if_down_cmd = 'ifconfig eth0:0 down'
# shutdown delegate IP command
# (change requires restart)
arping_path = '/usr/sbin' # arping command path
# (change requires restart)
arping_cmd = 'arping -U $_IP_$ -w 1'
# arping command
# (change requires restart)
# - Behaivor on escalation Setting -
clear_memqcache_on_escalation = on
# Clear all the query cache on shared
memory
# when standby pgpool escalate to
active pgpool
# (= virtual IP holder).
# This should be off if client connects
to pgpool
# not using virtual IP.
# (change requires restart)
wd_escalation_command = ''
# Executes this command at escalation
on new active pgpool.
# (change requires restart)
# - Lifecheck Setting -
# -- common --
wd_lifecheck_method = 'heartbeat'
# Method of watchdog lifecheck
('heartbeat' or 'query')
# (change requires restart)
wd_interval = 10
# lifecheck interval (sec) > 0
# (change requires restart)
# -- heartbeat mode --
wd_heartbeat_port = 9694
# Port number for receiving heartbeat
signal
# (change requires restart)
wd_heartbeat_keepalive = 2
# Interval time of sending heartbeat
signal (sec)
# (change requires restart)
wd_heartbeat_deadtime = 30
# Deadtime interval for heartbeat
signal (sec)
# (change requires restart)
heartbeat_destination0 = 'host0_ip1'
# Host name or IP address of
destination 0
# for sending heartbeat signal.
# (change requires restart)
heartbeat_destination_port0 = 9694
# Port number of destination 0 for
sending
# heartbeat signal. Usually this is the
# same as wd_heartbeat_port.
# (change requires restart)
heartbeat_device0 = ''
# Name of NIC device (such like 'eth0')
# used for sending/receiving heartbeat
# signal to/from destination 0.
# This works only when this is not empty
# and pgpool has root privilege.
# (change requires restart)
#heartbeat_destination1 = 'host0_ip2'
#heartbeat_destination_port1 = 9694
#heartbeat_device1 = ''
# -- query mode --
wd_life_point = 3
# lifecheck retry times
# (change requires restart)
wd_lifecheck_query = 'SELECT 1'
# lifecheck query to pgpool from
watchdog
# (change requires restart)
wd_lifecheck_dbname = 'template1'
# Database name connected for lifecheck
# (change requires restart)
wd_lifecheck_user = 'nobody'
# watchdog user monitoring pgpools in
lifecheck
# (change requires restart)
wd_lifecheck_password = ''
# Password for watchdog user in
lifecheck
# (change requires restart)
# - Other pgpool Connection Settings -
#other_pgpool_hostname0 = 'host0'
# Host name or IP address to connect to
for other pgpool 0
# (change requires restart)
#other_pgpool_port0 = 5432
# Port number for othet pgpool 0
# (change requires restart)
#other_wd_port0 = 9000
# Port number for othet watchdog 0
# (change requires restart)
#other_pgpool_hostname1 = 'host1'
#other_pgpool_port1 = 5432
#other_wd_port1 = 9000
#------------------------------------------------------------------------------
# OTHERS
#------------------------------------------------------------------------------
relcache_expire = 0
# Life time of relation cache in seconds.
# 0 means no cache expiration(the
default).
# The relation cache is used for cache
the
# query result against PostgreSQL system
# catalog to obtain various information
# including table structures or if it's a
# temporary table or not. The cache is
# maintained in a pgpool child local
memory
# and being kept as long as it survives.
# If someone modify the table by using
# ALTER TABLE or some such, the relcache
is
# not consistent anymore.
# For this purpose, cache_expiration
# controls the life time of the cache.
relcache_size = 256
# Number of relation cache
# entry. If you see frequently:
# "pool_search_relcache: cache
replacement happend"
# in the pgpool log, you might want to
increate this number.
check_temp_table = on
# If on, enable temporary table check in
SELECT statements.
# This initiates queries against system
catalog of primary/master
# thus increases load of master.
# If you are absolutely sure that your
system never uses temporary tables
# and you want to save access to
primary/master, you could turn this off.
# Default is on.
#------------------------------------------------------------------------------
# ON MEMORY QUERY MEMORY CACHE
#------------------------------------------------------------------------------
memory_cache_enabled = off
# If on, use the memory cache
functionality, off by default
memqcache_method = 'shmem'
# Cache storage method. either
'shmem'(shared memory) or
# 'memcached'. 'shmem' by default
# (change requires restart)
memqcache_memcached_host = 'localhost'
# Memcached host name or IP address.
Mandatory if
# memqcache_method = 'memcached'.
# Defaults to localhost.
# (change requires restart)
memqcache_memcached_port = 11211
# Memcached port number. Mondatory if
memqcache_method = 'memcached'.
# Defaults to 11211.
# (change requires restart)
memqcache_total_size = 67108864
# Total memory size in bytes for storing
memory cache.
# Mandatory if memqcache_method =
'shmem'.
# Defaults to 64MB.
# (change requires restart)
memqcache_max_num_cache = 1000000
# Total number of cache entries.
Mandatory
# if memqcache_method = 'shmem'.
# Each cache entry consumes 48 bytes on
shared memory.
# Defaults to 1,000,000(45.8MB).
# (change requires restart)
memqcache_expire = 0
# Memory cache entry life time specified
in seconds.
# 0 means infinite life time. 0 by
default.
# (change requires restart)
memqcache_auto_cache_invalidation = on
# If on, invalidation of query cache is
triggered by corresponding
# DDL/DML/DCL(and memqcache_expire). If
off, it is only triggered
# by memqcache_expire. on by default.
# (change requires restart)
memqcache_maxcache = 409600
# Maximum SELECT result size in bytes.
# Must be smaller than
memqcache_cache_block_size. Defaults to 400KB.
# (change requires restart)
memqcache_cache_block_size = 1048576
# Cache block size in bytes. Mandatory
if memqcache_method = 'shmem'.
# Defaults to 1MB.
# (change requires restart)
memqcache_oiddir = '/var/log/pgpool/oiddir'
# Temporary work directory to record
table oids
# (change requires restart)
white_memqcache_table_list = ''
# Comma separated list of table names to
memcache
# that don't write to database
# Regexp are accepted
black_memqcache_table_list = ''
# Comma separated list of table names
not to memcache
# that don't write to database
# Regexp are accepted
--
[image: FBS Logo]
*Travis Kirstine*, Web Development Supervisor
*t *905‑477‑3600* x *301 | *m *647‑534‑4798 |
tkirstine at firstbasesolution.com
*First Base Solutions Inc.*
140 Renfrew Drive, Suite 100 | Markham | Ontario | L3R 6B3
*t* 905‑477‑3600 | *f* 905‑477‑0892 | www.firstbasesolutions.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.sraoss.jp/pipermail/pgpool-general/attachments/20151006/f649d8c0/attachment-0001.html>
More information about the pgpool-general
mailing list