[pgpool-general-jp: 915] Q) pg_dump が出来ないのですが、、、

[ken]

山田＠町田市と申します。
　psql (8.4.4)と pgpool-II (3.0.3)の組み合わせで使用しているのですが、以下のようなエラーが出てバックアップが取れません。　修復方法、或いはバックアップの方法はありますでしょうか？ 誤ってpgpool-IIをヴァージョンアップしてしまったのかもしれませんが、、、。
　宜しくお願いします。

# pg_dump -h x.x.x.x  -p 9999 databaseXX >/tmp/database.db
pg_dump: SQLコマンドが失敗しました
pg_dump: サーバのエラーメッセージ: ERROR:  kind mismatch among backends. Possible last query was: "SELECT a.attnum, a.attname, a.atttypmod, a.attstattarget, a.attstorage, t.typstorage, a.attnotnull, a.atthasdef, a.attisdropped, a.attlen, a.attalign, a.attislocal, pg_catalog.format_type(t.oid,a.at
メッセージの内容がメッセージ種類"E"の長さに合いません
サーバとの接続が想定外にクローズされました
        おそらく要求の処理前または処理中にサーバが異常終了
        したことを意味しています。
pg_dump: 次のコマンドでした: SELECT a.attnum, a.attname, a.atttypmod, a.attstattarget, a.attstorage, t.typstorage, a.attnotnull, a.atthasdef, a.attisdropped, a.attlen, a.attalign, a.attislocal, pg_catalog.format_type(t.oid,a.atttypmod) AS atttypname, '' AS attoptions FROM pg_catalog.pg_attribute a LEFT JOIN pg_catalog.pg_type t ON a.atttypid = t.oid WHERE a.attrelid = '16391'::pg_catalog.oid AND a.attnum > 0::pg_catalog.int2 ORDER BY a.attrelid, a.attnum

pgpool.conf 
#
# pgpool-II configuration file sample
# $Header: /cvsroot/pgpool/pgpool-II/pgpool.conf.sample,v 1.15 2007/10/31 10:45:52 y-asaba Exp $

# Host name or IP address to listen on: '*' for all, '' for no TCP/IP
# connections
listen_addresses = '*'

# Port number for pgpool
port = 9999

# Port number for pgpool communication manager
pcp_port = 9898

# Unix domain socket path.  (The Debian package defaults to
# /var/run/postgresql.)
socket_dir = '/tmp'

# Unix domain socket path for pgpool communication manager.
# (Debian package defaults to /var/run/postgresql)
pcp_socket_dir = '/tmp'

# Unix domain socket path for the backend. Debian package defaults to /var/run/postgresql!
backend_socket_dir = '/tmp'

# pgpool communication manager timeout. 0 means no timeout, but strongly not recommended!
pcp_timeout = 10

# number of pre-forked child process
num_init_children = 32

# Number of connection pools allowed for a child process
max_pool = 4

# If idle for this many seconds, child exits.  0 means no timeout.
child_life_time = 300

# If idle for this many seconds, connection to PostgreSQL closes.
# 0 means no timeout.
connection_life_time = 0

# If child_max_connections connections were received, child exits.
# 0 means no exit.
child_max_connections = 0

# If client_idle_limit is n (n > 0), the client is forced to be
# disconnected whenever after n seconds idle (even inside an explicit
# transactions!)
# 0 means no disconnect.
client_idle_limit = 0

# Maximum time in seconds to complete client authentication.
# 0 means no timeout.
authentication_timeout = 60

# Logging directory
logdir = '/var/log'

# Replication mode
replication_mode = true

# Set this to nonzero (in milliseconds) to detect this situation and
# resolve the deadlock by aborting current session.
replication_timeout = 5000

# Load balancing mode, i.e., all SELECTs except in a transaction block
# are load balanced.  This is ignored if replication_mode is false.
load_balance_mode = true   #false

# if there's a data mismatch between master and secondary
# start degeneration to stop replication mode
replication_stop_on_mismatch = false

# If true, replicate SELECT statement when load balancing is disabled.
# If false, it is only sent to the master node.
replicate_select = true

# Semicolon separated list of queries to be issued at the end of a session
reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'

# If true print timestamp on each log line.
print_timestamp = true

# If true, operate in master/slave mode.
master_slave_mode = false

# If true, cache connection pool.
connection_cache = true

# Health check timeout.  0 means no timeout.
health_check_timeout = 20

# Health check period.  0 means no health check.
health_check_period = 0

# Health check user
health_check_user = 'nobody'

# Execute command by failover.
# special values:  %d = node id
#                  %h = host name
#                  %p = port number
#                  %D = database cluster path
#                  %% = '%' character
#
failover_command = ''

# Execute command by failback.
# special values:  %d = node id
#                  %h = host name
#                  %p = port number
#                  %D = database cluster path
#                  %% = '%' character
#
failback_command = ''

# If true, automatically lock table with INSERT statements to keep SERIAL
# data consistency.  An /*INSERT LOCK*/ comment has the same effect.  A
# /NO INSERT LOCK*/ comment disables the effect.
insert_lock = false

# If true, ignore leading white spaces of each query while pgpool judges
# whether the query is a SELECT so that it can be load balanced.  This
# is useful for certain APIs such as DBI/DBD which is known to adding an
# extra leading white space.
ignore_leading_white_space = true

# If true, print all statements to the log.  Like the log_statement option
# to PostgreSQL, this allows for observing queries without engaging in full
# debugging.
log_statement = true

# If true, incoming connections will be printed to the log.
log_connections = true

# If true, hostname will be shown in ps status. Also shown in
# connection log if log_connections = true.
# Be warned that this feature will add overhead to look up hostname.
log_hostname = true

# if non 0, run in parallel query mode
parallel_mode = false

# if non 0, use query cache
enable_query_cache = false

#set pgpool2 hostname 
pgpool2_hostname = ''

# system DB info
system_db_hostname = 'localhost'
system_db_port = 5432
system_db_dbname = 'pgpool'
system_db_schema = 'pgpool_catalog'
system_db_user = 'pgpool'
system_db_password = ''

# backend_hostname, backend_port, backend_weight
# here are examples
backend_hostname0 = 'localhost'
backend_port0 = 5432
backend_weight0 = 1
backend_data_directory0 = '/home/databases/pgsql1/data'

backend_hostname1 = 'localhost'
backend_port1 = 5433
backend_weight1 = 1
backend_data_directory1 = '/home/databases/pgsql2/data'

backend_hostname2 = 'localhost'
backend_port2 = 5434
backend_weight2 = 1
backend_data_directory3 = '/home/databases/pgsql3/data'

# - HBA -

# If true, use pool_hba.conf for client authentication. In pgpool-II
# 1.1, the default value is false. The default value will be true in
# 1.2.
enable_pool_hba = false

# - online recovery -
# online recovery user
recovery_user = 'nobody'

# online recovery password
recovery_password = ''

# execute a command in first stage.
recovery_1st_stage_command = ''

# execute a command in second stage.
recovery_2nd_stage_command = ''