[Pgpool-general] online recovery fails on HPUX
Sandeep Thakkar
sandeeptt at yahoo.com
Fri Sep 2 07:05:14 UTC 2011
Sorry, I didn't get you.. Actually, both the server instances and the pgpool running on the same host.. Could this be an issue of loopback?
________________________________
From: Jose Mendoza <jose.mendoza at autonomy.com>
To: pgpool-general at pgfoundry.org
Sent: Friday, September 2, 2011 12:16 PM
Subject: Re: [Pgpool-general] online recovery fails on HPUX
SSh trust must be created on both server for all the accounts involved
in the recovery process.
I would add the ssh-keys the the user for pgpool and try again.
Jose
Autonomy Ops
verificare tua hinc
From:Sandeep Thakkar
[mailto:sandeeptt at yahoo.com]
Sent: Thursday, September 01, 2011 10:17 PM
To: Jose Mendoza; pgpool-general at pgfoundry.org
Subject: Re: [Pgpool-general] online recovery fails on HPUX
I can see the following lines in /tmp/pgpool.log:
......
2011-09-01 22:57:34 ERROR: pid 22975: check_replication_time_lag:
DB node is valid but no persistent connection
2011-09-01 22:57:34 DEBUG: pid 22936: health_check: 1 th DB node status: 3
2011-09-01 22:57:36 LOG: pid 23019: starting recovering node 1
2011-09-01 22:57:36 ERROR: pid 23019: start_recover: could not connect master
node.
2011-09-01 22:57:38 DEBUG: pid 22936: starting health checking
2011-09-01 22:57:38 DEBUG: pid 22936: health_check: 0 th DB node status: 1
2011-09-01 22:57:38 DEBUG: pid 22975: pool_ssl: SSL requested but SSL support
is not available
2011-09-01 22:57:38 DEBUG: pid 22975: s_do_auth: auth kind: 0
2011-09-01 22:57:38 DEBUG: pid 22975: s_do_auth: parameter status data received
2011-09-01 22:57:38 DEBUG: pid 22975: s_do_auth: parameter status data received
2011-09-01 22:57:38 DEBUG: pid 22975: s_do_auth: backend key data received
2011-09-01 22:57:38 DEBUG: pid 22975: s_do_auth: transaction state: I
2011-09-01 22:57:39 DEBUG: pid 22936: health_check: 1 th DB node status: 3
2011-09-01 22:57:39 ERROR: pid 22975: connect_inet_domain_socket: connect()
failed: Connection refused
2011-09-01 22:57:39 ERROR: pid 22975: make_persistent_db_connection: connection
to localhost(5445) failed
2011-09-01 22:57:39 DEBUG: pid 22975: do_query: kind: T
2011-09-01 22:57:39 DEBUG: pid 22975: num_fileds: 1
2011-09-01 22:57:39 DEBUG: pid 22975: do_query: kind: D
2011-09-01 22:57:39 DEBUG: pid 22975: do_query: kind: C
2011-09-01 22:57:39 DEBUG: pid 22975: do_query: kind: Z
2011-09-01 22:57:39 ERROR: pid 22975: check_replication_time_lag: DB node is
valid but no persistent connection
2011-09-01 22:57:43 DEBUG: pid 22936: starting health checking
......
________________________________
From:Sandeep
Thakkar <sandeeptt at yahoo.com>
To: Jose Mendoza <jose.mendoza at autonomy.com>;
"pgpool-general at pgfoundry.org" <pgpool-general at pgfoundry.org>
Sent: Friday, September 2, 2011 10:10 AM
Subject: Re: [Pgpool-general] online recovery fails on HPUX
# Logging directory
logdir = '/tmp'
________________________________
From:Jose
Mendoza <jose.mendoza at autonomy.com>
To: pgpool-general at pgfoundry.org
Sent: Wednesday, August 31, 2011 10:28 PM
Subject: Re: [Pgpool-general] online recovery fails on HPUX
What does your pgpool.conf say about logging:
# Logging directory
logdir = '/var/log'
Jose
Autonomy Ops
verificare
tua hinc
From:pgpool-general-bounces at pgfoundry.org
[mailto:pgpool-general-bounces at pgfoundry.org] On Behalf Of Sandeep
Thakkar
Sent: Wednesday, August 31, 2011 4:58 AM
To: Sandeep Thakkar; pgpool-general at pgfoundry.org
Subject: Re: [Pgpool-general] online recovery fails on HPUX
I see following two lines when the pcp_recovery_node is
fired.. Also, I cannot find recovery.log, but recovery.conf is present in
standby cluster directory..
....
2011-08-31 05:49:22 LOG: pid 20430: starting
recovering node 1
2011-08-31 05:49:22 ERROR: pid 20430: start_recover: could not connect master
node.
....
The pg_hba.conf has the following entry:
# "local" is for Unix domain socket connections only
local
all
all
trust
# IPv4 local connections:
host
all
all
127.0.0.1/32 trust
# IPv6 local connections:
host
all
all
::1/128
trust
host
replication
edb
127.0.0.1/32
trust
________________________________
From:Sandeep Thakkar <sandeeptt at yahoo.com>
To: "pgpool-general at pgfoundry.org"
<pgpool-general at pgfoundry.org>
Sent: Tuesday, August 30, 2011 2:44 PM
Subject: [Pgpool-general] online recovery fails on HPUX
Hi,
I'm using Postgres Plus Advanced Server on HP-UX 11.31 and found that the
online recovery does not work here.
pgPool version is 3.0.3-4
$pcp_recovery_node -d 20 localhost 9898 edb edb 1
DEBUG: send: tos="R", len=41
DEBUG: recv: tos="r", len=21, data=AuthenticationOK
DEBUG: send: tos="D", len=6
DEBUG: recv: tos="e", len=20, data=recovery failed
DEBUG: command failed. reason=recovery failed
BackendError
DEBUG: send: tos="X", len=4
I can see the following in the log:
....
LOG: incomplete startup packet
LOG: connection failed during start up processing: user= database=
....
Moreover, I do not see pgpool_recovery_node statement in the log, so wondering
if it is really getting executed. I have tried my scripts on Linux and it
worked all fine. So, there is no issue with the pgpool.conf or my basebackup
and other files.. Could this be an issue of HPUX?
Thanks.
_______________________________________________
Pgpool-general mailing list
Pgpool-general at pgfoundry.org
http://pgfoundry.org/mailman/listinfo/pgpool-general
_______________________________________________
Pgpool-general mailing list
Pgpool-general at pgfoundry.org
http://pgfoundry.org/mailman/listinfo/pgpool-general
_______________________________________________
Pgpool-general mailing list
Pgpool-general at pgfoundry.org
http://pgfoundry.org/mailman/listinfo/pgpool-general
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pgfoundry.org/pipermail/pgpool-general/attachments/20110902/63b62bee/attachment-0001.html>
More information about the Pgpool-general
mailing list