[pgpool-general: 8888] Re: pgpool sub-processes get terminated by segment fault
Zhaoxun Yan
yan.zhaoxun at gmail.com
Tue Jul 11 15:26:58 JST 2023
This is pg_hba.conf:
# TYPE DATABASE USER ADDRESS METHOD
# "local" is for Unix domain socket connections only
local all all peer
# IPv4 local connections:
#host all all 127.0.0.1/32 ident
# IPv6 local connections:
#host all all ::1/128 ident
# Allow replication connections from localhost, by a user with the
# replication privilege.
local replication all peer
#host replication all 127.0.0.1/32 ident
#host replication all ::1/128 ident
host replication all 172.17.0.0/16 trust
#host template1 checker 0.0.0.0/0 trust
host all all 0.0.0.0/0 md5
And attached is the postgresql log for 2023-7-15
On Mon, Jul 10, 2023 at 5:44 PM Bo Peng <pengbo at sraoss.co.jp> wrote:
> Hi,
>
> > I changed the configuration to process_management_mode =static,
> > and everything related to it as commented, but the mal-function persists.
> > Here is the log in debug mode:
>
> > 2023-07-07 14:59:12.379: child pid 20684: DEBUG: forwarding error
> message
> > to frontend
>
> It seems PostgreSQL returns an error.
>
> I think it may be caused by authentication failure.
> Could you check the PostgreSQL log if any error occurs?
>
> On Fri, 7 Jul 2023 15:03:46 +0800
> Zhaoxun Yan <yan.zhaoxun at gmail.com> wrote:
>
> > Hi Bo!
> >
> > I changed the configuration to process_management_mode =static,
> > and everything related to it as commented, but the mal-function persists.
> > Here is the log in debug mode:
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: BackendDesc: 113672
> bytes
> > requested for shared memo
> > ry
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: pool_coninfo_size:
> > num_init_children (32) * max_poo
> > l (4) * MAX_NUM_BACKENDS (128) * sizeof(ConnectionInfo) (160) = 2621440
> > bytes requested for shared m
> > emory
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: ProcessInfo:
> > num_init_children (32) * sizeof(Proces
> > sInfo) (48) = 1536 bytes requested for shared memory
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: UserSignalSlot: 24 bytes
> > requested for shared memor
> > y
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: POOL_REQUEST_INFO: 5272
> > bytes requested for shared
> > memory
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: stat_shared_memory_size:
> > 9216 bytes requested for s
> > hared memory
> > 2023-07-07 14:58:48.964: main pid 20671: LOG:
> > health_check_stats_shared_memory_size: requested size
> > : 12288
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: SI_ManageInfo: 24 bytes
> > requested for shared memory
> > 2023-07-07 14:58:48.964: main pid 20671: LOG: memory cache initialized
> > 2023-07-07 14:58:48.964: main pid 20671: DETAIL: memcache blocks :64
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG:
> shared_memory_cache_size:
> > 67108864
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG:
> shared_memory_fsmm_size: 64
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: pool_hash_size: 67108880
> > 2023-07-07 14:58:48.964: main pid 20671: DEBUG: POOL_QUERY_CACHE_STATS:
> 24
> > bytes requested for shared memory
> > 2023-07-07 14:58:48.964: main pid 20671: LOG: allocating (136981824)
> bytes
> > of shared memory segment
> > 2023-07-07 14:58:48.964: main pid 20671: LOG: allocating shared memory
> > segment of size: 136981824
> > 2023-07-07 14:58:49.041: main pid 20671: DEBUG: pool_coninfo_size:
> > num_init_children (32) * max_pool (4) * MAX_NUM_BACKENDS (128) *
> > sizeof(ConnectionInfo) (160) = 2621440 bytes requested for shared memory
> > 2023-07-07 14:58:49.041: main pid 20671: LOG:
> > health_check_stats_shared_memory_size: requested size: 12288
> > 2023-07-07 14:58:49.041: main pid 20671: LOG:
> > health_check_stats_shared_memory_size: requested size: 12288
> > 2023-07-07 14:58:49.041: main pid 20671: LOG: memory cache initialized
> > 2023-07-07 14:58:49.041: main pid 20671: DETAIL: memcache blocks :64
> > 2023-07-07 14:58:49.041: main pid 20671: DEBUG:
> shared_memory_cache_size:
> > 67108864
> > 2023-07-07 14:58:49.041: main pid 20671: DEBUG: memory cache request
> size
> > : 67108864
> > 2023-07-07 14:58:49.041: main pid 20671: DEBUG:
> shared_memory_fsmm_size: 64
> > 2023-07-07 14:58:49.044: main pid 20671: LOG: pool_discard_oid_maps:
> > discarded memqcache oid maps
> > 2023-07-07 14:58:49.058: main pid 20671: LOG:
> unix_socket_directories[0]:
> > /run/.s.PGSQL.9999
> > 2023-07-07 14:58:49.059: main pid 20671: LOG: listen address[0]: *
> > 2023-07-07 14:58:49.059: main pid 20671: LOG: Setting up socket for
> > 0.0.0.0:9999
> > 2023-07-07 14:58:49.059: main pid 20671: LOG: Setting up socket for
> :::9999
> > 2023-07-07 14:58:49.061: child pid 20680: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.061: child pid 20679: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.061: child pid 20678: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.061: child pid 20681: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.062: child pid 20677: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.062: child pid 20682: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.062: child pid 20683: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.062: child pid 20676: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.064: child pid 20684: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.064: child pid 20685: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.064: child pid 20686: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.064: child pid 20675: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.067: child pid 20697: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.067: child pid 20698: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.067: child pid 20699: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.067: child pid 20700: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.068: child pid 20674: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.069: main pid 20671: DEBUG:
> > find_primary_node_repeatedly: not in streaming replication mode
> > 2023-07-07 14:58:49.069: main pid 20671: LOG: listen address[0]:
> localhost
> > 2023-07-07 14:58:49.069: main pid 20671: LOG: Setting up socket for
> > ::1:9898
> > 2023-07-07 14:58:49.069: main pid 20671: LOG: Setting up socket for
> > 127.0.0.1:9898
> > 2023-07-07 14:58:49.069: child pid 20701: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.070: child pid 20705: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.070: child pid 20704: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.070: sr_check_worker pid 20707: LOG: process started
> > 2023-07-07 14:58:49.070: pcp_main pid 20706: DEBUG: I am PCP child with
> > pid:20706
> > 2023-07-07 14:58:49.070: sr_check_worker pid 20707: DEBUG: I am 20707
> > 2023-07-07 14:58:49.070: main pid 20671: LOG: pgpool-II successfully
> > started. version 4.4.3 (nurikoboshi)
> > 2023-07-07 14:58:49.070: child pid 20703: DEBUG: initializing backend
> > status
> > 2023-07-07 14:58:49.070: pcp_main pid 20706: LOG: PCP process: 20706
> > started
> > 2023-07-07 14:58:49.071: child pid 20702: DEBUG: initializing backend
> > status
> > 2023-07-07 14:59:12.379: child pid 20684: DEBUG: reading startup packet
> > 2023-07-07 14:59:12.379: child pid 20684: DETAIL: Protocol Major: 1234
> > Minor: 5679 database: user:
> > 2023-07-07 14:59:12.379: child pid 20684: DEBUG: forwarding error
> message
> > to frontend
> > 2023-07-07 14:59:12.379: child pid 20684: FATAL: pgpool is not accepting
> > any new connections
> > 2023-07-07 14:59:12.379: child pid 20684: DETAIL: all backend nodes are
> > down, pgpool requires at least one valid node
> > 2023-07-07 14:59:12.379: child pid 20684: HINT: repair the backend nodes
> > and restart pgpool
> > 2023-07-07 14:59:12.380: main pid 20671: LOG: reaper handler
> > 2023-07-07 14:59:12.380: main pid 20671: DEBUG: child process with pid:
> > 20684 exits with status 256
> > 2023-07-07 14:59:12.380: main pid 20671: DEBUG: fork a new child process
> > with pid: 20711
> > 2023-07-07 14:59:12.380: main pid 20671: LOG: reaper handler: exiting
> > normally
> > 2023-07-07 14:59:12.380: child pid 20711: DEBUG: initializing backend
> > status
> >
> > And attached is the new configuration.
> >
> > On Wed, Jul 5, 2023 at 3:58 PM Bo Peng <pengbo at sraoss.co.jp> wrote:
> >
> > > Hi,
> > >
> > > Thank you for sharing the configuration file.
> > >
> > > You are using "dynamic process management mode".
> > > It seems if max_spare_children is greater than num_init_children,
> > > segment fault occurs.
> > >
> > > I think it is a bug of pgpool.
> > > I will share your report with the developer who is in charge of dynamic
> > > process management mode.
> > >
> > > On Wed, 5 Jul 2023 13:39:51 +0800
> > > Zhaoxun Yan <yan.zhaoxun at gmail.com> wrote:
> > >
> > > > On Wed, Jul 5, 2023 at 1:00 PM Bo Peng <pengbo at sraoss.co.jp> wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > > I tested 4.4.3 and it should not happen normally.
> > > > > Could you share your pgpool.conf?
> > > > >
> > > > > On Wed, 5 Jul 2023 12:03:29 +0800
> > > > > Zhaoxun Yan <yan.zhaoxun at gmail.com> wrote:
> > > > >
> > > > > > Hi guys!
> > > > > >
> > > > > > Is it a bug? I started local postgres as backend_hostname0 =
> > > > > '172.17.0.2'
> > > > > > And it is visitable:
> > > > > > # psql -h 172.17.0.2 -p 5432 -U checker template1
> > > > > > Password for user checker:
> > > > > > psql (13.10)
> > > > > > Type "help" for help.
> > > > > >
> > > > > > template1=> \q
> > > > > >
> > > > > > Although pgpool is listening on 9999:
> > > > > > # ss -tlnp
> > > > > > State Recv-Q Send-Q Local Address:Port
> > > > > > Peer Address:Port Process
> > > > > > LISTEN 0 244 0.0.0.0:5432
> > > > > > 0.0.0.0:* users:(("postgres",pid=8680,fd=6))
> > > > > > LISTEN 0 64 127.0.0.1:9898
> > > > > > 0.0.0.0:*
> > > > > >
> > > > >
> > >
> users:(("pgpool",pid=8780,fd=11),("pgpool",pid=8773,fd=11),("pgpool",pid=8720,fd=11))
> > > > > > LISTEN 0 64 0.0.0.0:9999
> > > > > > 0.0.0.0:*
> > > > > >
> > > > >
> > >
> users:(("pgpool",pid=8780,fd=5),("pgpool",pid=8773,fd=5),("pgpool",pid=8754,fd=5),("pgpool",pid=8753,fd=5),("pgpool",pid=8752,fd=5),("pgpool",pid=8751,fd=5),("pgpool",pid=8750,fd=5),("pgpool",pid=8749,fd=5),("pgpool",pid=8748,fd=5),("pgpool",pid=8747,fd=5),("pgpool",pid=8746,fd=5),("pgpool",pid=8745,fd=5),("pgpool",pid=8744,fd=5),("pgpool",pid=8742,fd=5),("pgpool",pid=8741,fd=5),("pgpool",pid=8740,fd=5),("pgpool",pid=8739,fd=5),("pgpool",pid=8738,fd=5),("pgpool",pid=8737,fd=5),("pgpool",pid=8736,fd=5),("pgpool",pid=8735,fd=5),("pgpool",pid=8734,fd=5),("pgpool",pid=8733,fd=5),("pgpool",pid=8732,fd=5),("pgpool",pid=8731,fd=5),("pgpool",pid=8730,fd=5),("pgpool",pid=8729,fd=5),("pgpool",pid=8728,fd=5),("pgpool",pid=8727,fd=5),("pgpool",pid=8726,fd=5),("pgpool",pid=8724,fd=5),("pgpool",pid=8723,fd=5),("pgpool",pid=8720,fd=5))
> > > > > > LISTEN 0 128 0.0.0.0:22
> > > > > > 0.0.0.0:* users:(("sshd",pid=1395,fd=3))
> > > > > > LISTEN 0 244 [::]:5432
> > > > > > [::]:* users:(("postgres",pid=8680,fd=7))
> > > > > > LISTEN 0 64 [::1]:9898
> > > > > > [::]:*
> > > > > >
> > > > >
> > >
> users:(("pgpool",pid=8780,fd=10),("pgpool",pid=8773,fd=10),("pgpool",pid=8720,fd=10))
> > > > > > LISTEN 0 64 [::]:9999
> > > > > > [::]:*
> > > > > >
> > > > >
> > >
> users:(("pgpool",pid=8780,fd=6),("pgpool",pid=8773,fd=6),("pgpool",pid=8754,fd=6),("pgpool",pid=8753,fd=6),("pgpool",pid=8752,fd=6),("pgpool",pid=8751,fd=6),("pgpool",pid=8750,fd=6),("pgpool",pid=8749,fd=6),("pgpool",pid=8748,fd=6),("pgpool",pid=8747,fd=6),("pgpool",pid=8746,fd=6),("pgpool",pid=8745,fd=6),("pgpool",pid=8744,fd=6),("pgpool",pid=8742,fd=6),("pgpool",pid=8741,fd=6),("pgpool",pid=8740,fd=6),("pgpool",pid=8739,fd=6),("pgpool",pid=8738,fd=6),("pgpool",pid=8737,fd=6),("pgpool",pid=8736,fd=6),("pgpool",pid=8735,fd=6),("pgpool",pid=8734,fd=6),("pgpool",pid=8733,fd=6),("pgpool",pid=8732,fd=6),("pgpool",pid=8731,fd=6),("pgpool",pid=8730,fd=6),("pgpool",pid=8729,fd=6),("pgpool",pid=8728,fd=6),("pgpool",pid=8727,fd=6),("pgpool",pid=8726,fd=6),("pgpool",pid=8724,fd=6),("pgpool",pid=8723,fd=6),("pgpool",pid=8720,fd=6))
> > > > > > LISTEN 0 128 [::]:22
> > > > > > [::]:* users:(("sshd",pid=1395,fd=4))
> > > > > >
> > > > > > It is not visitable:
> > > > > > # psql -h 127.0.0.1 -p 9999 -U checker template1
> > > > > > psql: error: server closed the connection unexpectedly
> > > > > > This probably means the server terminated abnormally
> > > > > > before or while processing the request.
> > > > > > Checking out the log, any pgpool subprocess is killed by segment
> > > fault.
> > > > > > And I run it again using debug mode, the same thing happens.
> > > > > > Attached is the pgpool log. Thanks in advance.
> > > > >
> > > > >
> > > > > --
> > > > > Bo Peng <pengbo at sraoss.co.jp>
> > > > > SRA OSS LLC
> > > > > TEL: 03-5979-2701 FAX: 03-5979-2702
> > > > > URL: https://www.sraoss.co.jp/
> > > > >
> > >
> > >
> > > --
> > > Bo Peng <pengbo at sraoss.co.jp>
> > > SRA OSS LLC
> > > TEL: 03-5979-2701 FAX: 03-5979-2702
> > > URL: https://www.sraoss.co.jp/
> > >
>
>
> --
> Bo Peng <pengbo at sraoss.co.jp>
> SRA OSS LLC
> TEL: 03-5979-2701 FAX: 03-5979-2702
> URL: https://www.sraoss.co.jp/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pgpool.net/pipermail/pgpool-general/attachments/20230711/062762d0/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pg-07-05.log
Type: application/octet-stream
Size: 706 bytes
Desc: not available
URL: <http://www.pgpool.net/pipermail/pgpool-general/attachments/20230711/062762d0/attachment-0001.obj>
More information about the pgpool-general
mailing list